3M™ Particulate Filter 2096, P100, with Nuisance Level Acid Gas Relief 100 EA/Case

NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for relief against nuisance levels of acid gases.

Price: $517.67

(Case of 100 Case)

  • $517.67
  • Case of 100 - $517.67
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      5.9 lbs
    • SKU
      7000002048
    • UPC/ISBN
      50051138542950
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000002048
  • 3M ID
    70070710937
  • UPC
    00-51138-54295-0
  • Product Formal Name
    3M™ Particulate Filter 2096, P100, with Nuisance Level Acid Gas Relief 100 EA/Case
  • Brand-old
    3M
  • Case Unit
    Case of 100
  • Unit of Measure
    Case
  • Estimated Lead Time
    2
  • Grit/Micron
    100
  • Size Metric
    4.3 Inch
  • Inventory Status Code
    S
  • Technical Information
    https://multimedia.3m.com/mws/media/7382J/3m-filters-2000-series-technical-bulletin.jpg
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    17.7
  • Box Width (in)
    10.3
  • Box Height (in)
    9
  • Bullets
    • Bullet 1
      - Exceptional 99.97% filter efficiency meets NIOSH P100-series test criteria
      - Versatile protection against many oil and non-oil based particulate contaminants
      - Nuisance odor relief for acid gas levels below the Permissible Exposure Level (PEL)
      - Bayonet compatibility allows use with many 3M™ half and full facepieces and certain 3M™ Scott™ full facepieces
      - Wide range of applications reduces inventory needs and training requirements
  • Transportation
    • ECCN Number
      1A995;COV19
    • Harmonized Tariff Schedule Number
      9020006000
    • UNSPSC Code
      46182002
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      069020
    • NMFC Class
      100.0
    • NMFC Sub
      02
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000002048
  • UPC/ISBN
    50051138542950

The 3M™ Particulate Filter 2096, P100, with Nuisance Level Acid Gas Relief helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odor relief from acid gases that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government exposure limits, whichever is lower. Do not use for respiratory protection against acid gases or in environments that are immediately dangerous to life or health (IDLH). Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. This filter is commonly used in the following industries: mining, primary metals,.The filter works with a wide range of facepieces, including 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series. If used with 3M™ Adapter 502, the filter may also be used with 3M™ Respirator 5000 Series or 3M™ Cartridge 6000 Series. If used with the 3M™ Scott™ AV-632 Bayonet Adapter, the filter may be used with the 3M™ Scott™ AV-3000 HT and AV-3000 SureSeal facepieces. The filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain oil and non-oil based particles. The filter has been assigned the color code “Magenta” in the NIOSH system. Passing NIOSH’s P-series test criteria, the 2096 P100 filter provides at least 99.97 percent filter efficiency against particles.Breathing hazardous particles can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Particulate Filter 2096 to help reduce exposure to certain particles.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Tips For Using A Filtering Facepiece Respirator

Customers who viewed this product bought