The 3M™ Multi Gas/Vapor Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, and primary metals.This multi gas/vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non-oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/ Olive” in the NIOSH system.Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Multi Gas Vapor Cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates.