3M™ Filter/Adapter/Retainer Kit 6N01, N95, 1 Kit/Case

The 3M™ filter/holder/retainer kit 6N01, N95 is a start-up kit containing 40 3M™ Particulate Filters 5N11, N95; 20 3M™ 501 Filter Retainers and 20 3M™ 603 Filter Adapters. The kit is enough for 10 separate users to have 1 initial filter pair and 1 filter pair change out.
Price: $184.07

(Case of 1 Kit(s))

  • $184.07
  • Case of 1 - $184.07
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      4.073 lbs
    • SKU
      7100234543
    • UPC/ISBN
      50638060429674
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100234543
  • 3M ID
    70071765237
  • UPC
    00638060431412
  • Product Formal Name
    3M™ Filter/Adapter/Retainer Kit 6N01, N95, 1 Kit/Case
  • Case Unit
    Case of 1
  • Unit of Measure
    Kit(s)
  • Estimated Lead Time
    2
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    16.3
  • Box Width (in)
    10.3
  • Box Height (in)
    4.6
  • Bullets
    • Bullet 1
      - Start-up kit includes supplies for 10 separate users with 1 initial filter pair and 1 filter pair change out each; order additional replacement filters separately
      - Use 3M™ Particulate Filter 5N11 with 3M™ 603 Filter Adapter and 3M™ 501 Filter Retainer
      - Includes 40 3M™ 5N11 Particulate Filters, N95 (enough for separate 10 users and 1 filter pair change out)
      - Includes 20 3M™ 501 Filter Retainers (enough for 10 separate users), may be reused multiple times and wiped down
      - Includes 20 3M™ 603 Filter Adapters (enough for separate 10 users), may be reused multiple times and wiped down
      - 3M™ 603 Filter Adapter and 3M™501 Filter Retainer may also be used with 3M™ 5P71 prefilter
      - 3M™ 603 Filter Adapters has a bayonet attachment and may be used with 3M™ 6000, 7000 and FF-400 series reusable respirator facepieces or 3M™ Scott™ AV-3000 HT and AV-3000 SureSeal faecpieces with the 3M™ Scott™ AV-632 Bayonet Adapter.
      - 3M™ 501 Filter Retainer holds 3M™ Particulate Filters 5N11 or 5P71/07194 (AAD) in place on top of 3M™ 6000 Cartridge Series or 3M™ 603 Filter Adapter
      - All respirators, replacement filters, cartridges, and adapters sold separately
      - Refer to the Filter/Cartridge User Instructions for further information
  • Transportation
    • ECCN Number
      1A995
    • Harmonized Tariff Schedule Number
      5911900080
    • UNSPSC Code
      46182002
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      156600
    • NMFC Class
      100.0
    • NMFC Sub
      06
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100234543
  • UPC/ISBN
    50638060429674

The 3M™ Particulate Filter 5N11, N95 helps provide respiratory protection in environments containing certain non-oil based particles. When properly fitted, use with appropriate cartridges or adapters for various applications for industrial and healthcare settings. Industrial applications include spray painting, petrochemical and chemical manufacturing, and pesticide spraying for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. Healthcare applications may include, but not limited to, protection from bioaerosols and airborne particulates. The filter helps protect against: 1) solids such as those from processing minerals, coal, iron ore, cotton, flour, and certain other substances; 2) liquids or non-oil based particles from sprays that do not emit harmful vapors; 3) metal fumes produced from welding, brazing, cutting, and other operations involving heating of metals; and 4) bioaerosols and airborne particulates.The filter is NIOSH (U.S. National Institute for Occupational Safety and Health) approved for environments containing certain non-oil based particles. This filter has been rated N95, which means filtration efficiency of at least 95%, but is not resistant to oil. The 3M™ Filter Adapter 603 enables the 3M™ Particulate Filter 5N11 or 3M™ Particulate Filter 5P71 (N95 and P95, respectively) prefilters to be directly attached to all bayonet style 3M™ Half or Full Facepiece Respirators. 3M™ 501 Filter Retainer holds 3M™ Particulate Filters 5N11 or 5P71/07194 (AAD) in place on top of 3M™ 6000 Cartridge Series or 3M™ 603 Filter Adapter. Both the 3M™ Filter Adapter 603 and 3M™ Filter Retainer 501 may be used multiple times and wiped down.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Tips For Using A Filtering Facepiece Respirator