Powered & Supplied Air Respirators
Sort by: Recommended
3M™ Versaflo™ Multi Layer Peel-Off Visor Cover, S-923-50, for S-600 S-700 and S-800 Assemblies 50 EA/CaseThe 3M™ Versaflo™ S-923-50 Visor Cover is a multi layer transparent covering for S-Series hood assemblies to protect the visor from paint over spray, contaminants and scratches.
3M™ Supplied Air Hose W-2929SR-100, 100 ft, 3/8 in ID, Schrader Fittings, High Pressure, Coiled 1 EA/CaseCan be used on 3M™ High Pressure Compressed Air Systems. Comes with 1/4 inch FPT, 1/4 inch body size Shrader fittings. Coiled hoses should be used in single length only. They cannot be combined.
This socket is a high pressure hose socket that may be used on the 3M™ Supplied Air Hose W 9435 and W 2929.
This plug is a high pressure hose plug that may be used on the 3M™ Supplied Air Hose W 9435 or W 2929.
Includes retaining ring screen, disc nut, o-rings, check valve and spring.
The W-3062 regulates the flow of compressed air to 3M™ Facepieces 7000 Series.
Used with the 3M™ Connector W-3195, Low Pressure, which is used on the 3M™ Supplied Air Hose W-3020. It has a 1/4 inch MPT steel fitting.
Used with an approved air source, M 300 Series hardhats provide respiratory (OSHA APF=25) and limited head (ANSI Z89.1 2003 Type 1 Class G) and eye (ANSI Z87.1 2010) protection.
The W 3098 is a component that is used on the 3M™ Compressed Air Filter and Regulator Panel W 2806.
This breathing tube is part of the 3M™ Air Regulating Valve Assembly W-3061 which allows the 3M™ Full Facepiece 7800S or the 3M™ Full Facepieces 6000DIN to be operated in airline mode. The breathing tube connects to the 3M™ Airline Adapter W-3187 in the center part of the facepiece.
Used with the 3M™ Compressed Air Filter and Regulator Panel W-2806.
Used on the 3M™ Connector W-3195, Low Pressure, which is used with the 3M™ Supplied Air Hose W-3020, Low Pressure. It has a 1/4 inch MPT steel fitting.