3M™ Sanding and Fiberglass Valved Respirator 8511HA1-C-PS, 1ea/pk, 12 pks/cs

Recommended for particulates from sanding, grinding, sawing and insulating projects. The proprietary Cool Flow™ valve allows for easy exhalation and heat reduction for cool, dry comfort. NIOSH approved: N95.
Price: $57.05

(Case of 12 Each)

  • $57.05
  • Case of 12 - $57.05
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      2.059 lbs
    • SKU
      7100117608
    • UPC/ISBN
      00051141902821
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100117608
  • 3M ID
    70006963113
  • UPC
    00-51141-90282-1
  • Product Formal Name
    3M™ Sanding and Fiberglass Valved Respirator 8511HA1-C-PS, 1ea/pk, 12 pks/cs
  • Case Unit
    Case of 12
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    16.6
  • Box Width (in)
    7.3
  • Box Height (in)
    9.3
  • Bullets
    • Bullet 1
      - NIOSH-APPROVED N95 for at least 95 percent filtration efficiency against certain non-oil-based particles and aerosols
      - 3M™COOL FLOW™ VALVE helps reduce heat build-up inside the respirator
      - BREATHE 30% EASIER* *Compared to 3M™ 8200, breathe easier is defined as initial pressure drop
      - ADVANCED FILTER MEDIA for easier breathing
      - ADJUSTABLE M-NOSECLIP helps ensure a custom, secure seal with fewer pressure points
      - STRETCHABLE, BRAIDED HEADBANDS for comfort
      - LIGHTWEIGHT DESIGN for comfort
      - COMFORTABLE for long periods of wear
      - CONVENIENT, DISPOABLE DESIGN
      - RECOMMENDED FOR relief from dusts and certain particles encountered during sanding projects (bare wood, non-lead painted surfaces, or drywall), grinding, sawing, sweeping, installation of fiberglass insulation
      - ALSO HELPS FILTER pollen, mold spores and dust particles encountered during outdoor activities such as gardening, cutting firewood, raking, and mowing
      - Contains no components made from natural rubber latex
      - Package contents: 1
      - DIY/Home Use: Use ONLY in NON-HARMFUL environments. Occupational/Hazardous Use: Use under a government regulated (e.g. OSHA) respiratory protection program. WARNING: Limitations apply; Misuse may result in sickness or death. See product packaging and insert or call 3M in USA at 1-800-243-4630. In Canada, call 1-800-267-4414.
  • Transportation
    • ECCN Number
      1A995;COV19
    • Harmonized Tariff Schedule Number
      6307909845
    • UNSPSC Code
      46182002
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      134140
    • NMFC Class
      175.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100117608
  • UPC/ISBN
    00051141902821

Part of our Pro Series, the 3M™ 8511 Respirator with Cool Flow™ Valve is designed with the pro in mind to help bring you protection and comfort. Our most popular valved disposable respirator, it is equipped with a Cool Flow™ valve, which helps reduce heat build-up inside the respirator, helping to enhance your comfort during longer jobs. This N95 respirator features Advanced Electrostatic Media that enhances the capture of airborne particles while allowing you to breathe easier. An adjustable M-noseclip helps provide a custom, secure seal. Whether you're hanging drywall or sanding a floor, rely on the trusted protection of the 3M™ 8511 Respirator with Cool Flow™ Valve.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Tips For Putting On A 3M Disposable Respirator
Tips On When To Replace Your 3M Disposable Respirator