3M™ Whole House Water Treatment Media N-050P, Neutralizer, .5 cf Pail, 1 Per Case

The 3M™ Whole House Water Treatment Media N-050P is a blended filter media used in Residential and Commercial applications used to neutralize highly acidic or low pH water to a neutral, less corrosive effluent level. N-050P is a calcium carbonate and magnesium oxide blended filter media.
Price: $723.47

(This price is for a MOQ of 9 cases of 1 Each)

Estimated Lead Time is 15 working days.
  • $723.47
  • Case of 1 - $723.47
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      45 lbs
    • SKU
      7100010436
    • UPC/ISBN
      00054007970996
  • Industry
    HC
  • Lead Time
    15
  • Manufacturer
    3M
  • SAP
    7100010436
  • 3M ID
    70020097955
  • UPC
    00-54007-97099-6
  • Product Formal Name
    3M™ Whole House Water Treatment Media N-050P, Neutralizer, .5 cf Pail, 1 Per Case
  • Brand-old
    3M
  • Case Unit
    This price is for a MOQ of 9 cases of 1
  • Unit of Measure
    Each
  • Product ID
    N-050P
  • Estimated Lead Time
    15
  • Grit/Micron
    Medium
  • Size
    12 in x 12 in
  • Size Metric
    12 Inch x 30.48 Centimeter
  • Inventory Status Code
    N
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM8t94Y_1Pv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Applications
    Water Conditioning for Bathing/Showering
  • Return Policy
    No Return
  • Width
    12 in
  • Length
    12 in
  • Box Length (in)
    12.000
  • Box Width (in)
    12.000
  • Box Height (in)
    11.500
  • Bullets
    • Bullet 1
      - Corrects highly acidic water with a specific blend of calcium carbonate and magnesium oxide
      - Use in 3M water treatment products for highly acid neutralization and pH correction
      - Helps prevent pinhole leaks and pipe failure that can occur over time with acidic water
      - Keeps the metallic taste from acidity out of your drinking water
      - Helps prevent the potential of leaching of copper, lead and other metals found in typical plumbing systems with pH corrected water
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      3824993900
    • UNSPSC Code
      40161500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      050340
    • NMFC Class
      065.0
    • NMFC Sub
      01
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100010436
  • UPC/ISBN
    00054007970996

Your Acid Answer The 3M™ Whole House Water Treatment Media N-050P is a specific blend of calcium carbonate and magnesium oxide that corrects highly acidic water. Highly acidic water, or water with a pH rating of less than 7, is highly corrosive to piping and plumbing fixtures. With pH corrected water, you can prevent the potential of leaching of copper, lead and other metals found in typical plumbing systems. When used in a 3M water treatment system, such as a backwash filter, the periodic backwashing will help prevent packing of the media bed, as well as maintain high service levels of the media. The N-050P neutralization media will need to be replenished periodically as it is depleted. This replenishment rate depends upon many factors including pH levels, backwash frequency and filter system capacity. We recommend a gravel under-bed to support the N-050P filter media. Signs of acidic water are corrosion of fixtures, blue staining (from copper pipes) or rust staining (from iron pipes). Acidic water can also cause pinhole leaks and pipe failure over time. It may also cause aesthetic issues, such as metallic taste to the water or water based drinks. A Track Record of Success 3M branded water filtration products have been addressing water quality issues for over 50 years. 3M offers a wide range of solutions designed to address many types of water quality concerns. Many 3M water quality improvement solutions have third-party certifications, such as NSF and WQA. 3M, a household name, is a leader in filtration technology recognized for innovation, trust and quality around the world. Water: Nothing’s Closer to Home Clean and clear drinking water in your home is both a pleasure and a reassurance that you're giving your family the best. With a water filtration system from 3M Purification, you provide filtered drinking water for every member of your family. From whole home water filtration to drinking water systems, look to 3M Purification to help you find the right solution. A History of Innovation For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. The 3M brand, across thousands of products, represents consistency, superior quality and value. Our success begins with our culture of creative collaboration that inspires a never ending stream of powerful technologies and product solutions that make life better. We have an ability to apply our technologies – often in combination – to an endless array of real-world customer needs. Of course, all of this made possible by the people of 3M, and their singular commitment to make life easier and better for people around the world. 3M is committed to providing innovative, cost-effective products that help protect people, equipment, and our environment. 3M Purification Inc. (formerly CUNO Incorporated), provides filtration and separation solutions for residential, food service, science labs, industrial, marine and other applications.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.