3M™ Betapure™ AU Series Filter Cartridge AU09Z11NG120, 9 3/4 in, 12UM ABS, DOE, Polyethylene, 30 Per Case

We offer the Betapure™ AU Series Filter Cartridge in various grades for absolute reduction ratings. The controlled pore size of the filter matrix provides absolute distinction between cartridge grades for accurate and consistent filtration. Our filter design provides precise contaminant reduction, consistent effluent quality and superior on-stream service life for a wide-range of applications.
Price: $1457.50

(Case of 30 Each)

Estimated Lead Time is 90 working days.
  • $1457.50
  • Case of 30 - $1457.50
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      17.293 lbs
    • SKU
      7000125355
    • UPC/ISBN
      00016145110795
  • Industry
    HC
  • Lead Time
    90
  • Manufacturer
    3M
  • SAP
    7000125355
  • 3M ID
    70020005784
  • UPC
    00-16145-11079-5
  • Product Formal Name
    3M™ Betapure™ AU Series Filter Cartridge AU09Z11NG120, 9 3/4 in, 12UM ABS, DOE, Polyethylene, 30 Per Case
  • Brand
    Betapure
  • Case Unit
    Case of 30
  • Unit of Measure
    Each
  • Estimated Lead Time
    90
  • Inventory Status Code
    N
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    16.375
  • Box Width (in)
    13.500
  • Box Height (in)
    11.438
  • Bullets
    • Bullet 1
      - rigid structure Provides consistent and reproducible contaminant reduction
      - excellent reduction of deformable contaminants for consistent effluent quality
      - gasket design reduces by-pass from poor to damaged seals
      - rigid structure reduces cartridge by-pass and unloading for consistent filtration throughout Product lifecycle
      - low pressure drop Provides long service life while using smaller filter housings
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8421290065
    • UNSPSC Code
      47101500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      069095
    • NMFC Class
      070.0
    • NMFC Sub
      04
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000125355
  • UPC/ISBN
    00016145110795

Our wide range of media grades allows you to precisely tailor performance characteristics and achieve optimal filtration economy by enabling defined reduction cut-off points by particle size. We manufacture Betapure™ AU Series Filter Cartridges using state-of-the-art technology to produce a clean, rigid, filter structure that generatesreproducible effluent consistency. The filter matrix is constructed using long bicomponent fibers, each fiber having an inner core and an outer sheath. Betapure AU series filters are available in two bicomponent fiber structures, polypropylene/polyethylene or polyester/co-polyester, to provide a range of compatibility for your particular process. The Betapure™ AU Series Z11 and Z13 filter is available with a polypropylene media insert and glass paper insert respectively.In manufacturing the Betapure™ AU Series Filter we combine stringent material quality assurance standards, exacting in-process controls along with extensive final product testing and verification. The results are products that provide consistent filtration from lot-to-lot, filter-to-filter. The bicomponent fibers of the filter matrix are thermally bonded by exploiting the difference in melt temperatures of the two fiber components. Heating the matrix to the melt temperature of the polyethylene sheath, but below that of the polypropylene core causes the fiber-to-fiber bond at every contact point. And the high degree of fiber-to-fiber bonding provides a rigid structure that eliminates the need for a core support along with any possibility of media migration. Standard Betapure AU Series Filters (polypropylene /polypropylene) are constructed of FDA CFR-21 compliant material.ApplicationsCoatingsHigh Quality Paint, Film Coatings, Resins, and InkFood & BeverageBottled Water, Pre-Ro, Blend Water, Wash WaterGeneral IndustrialDesalination, Plating, Machine Tool Coolant, Process WaterElectronicsPre-Ro, Wafer Slurries, Ceramic Slurries, Chemical Mechanical Polishing, Cathode Ray Tube Production, Disc CleaningChemical/Petro-ChemicalProcess Water, Pre-Ro, Amine, Fine ChemicalsThe Rigid Construction AdvantageTo meet demanding filtration quality standards in today's market, absolute ratings will provide you with product consistency, and improve yields.Our rigid filter structure retains consistent pore size even under severe process conditions. Changes caused by pump fluctuations, stopping and restarting the system, or high differential pressure will have minimal, if any effect on product consistency. Depth filtration reduces deformable contaminants to help eliminate rework or product quality rejection.Critical to any filtration process is the reduction of filter by-pass. We effectively address this issue by design with our closed-cell polyethylene foam gasket to properly seal the cartridge for applications using knife-edge housing systems.Minimizing flow restriction can dramatically reduce filtration cost. Lower pressure drops mean increased filter life, product throughput, and permit the use

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Customers who bought this product also bought