CUNO™ CTG-Klean Series Housing, Model 7WTS3, 304SS, 1 1/4" In/Out, 300 psi @ 160F, ASME Code, 4751803

CUNO™ CTG-Klean Series Housing, Model 7WTS3, 304SS, 1 1/4" In/Out, 300 psi @ 160F, ASME Code, 4751803

Price: $8703.33

(Case of 1 Each)

Estimated Lead Time is 129 working days.
  • $8703.33
  • Case of 1 - $8703.33
Qty:  
Free shipping
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3 lbs
    • SKU
      7100206412
    • UPC/ISBN
      00638060354414
  • Lead Time
    129
  • Manufacturer
    3M
  • SAP
    7100206412
  • UPC
    06-38060-35441-4
  • Product Formal Name
    CUNO™ CTG-Klean Series Housing, Model 7WTS3, 304SS, 1 1/4" In/Out, 300 psi @ 160F, ASME Code, 4751803
  • Brand
    CUNO
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Estimated Lead Time
    129
  • Inventory Status Code
    N
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Bullets
    • Bullet 1
      - Hardware and accessories help extend the capabilities of the CUNO™ CTG-Klean System
      - Easy-to-fit components help save time and labor costs
      - Stainless steel construction for long service life, durability, and ease of cleaning
      - Allows the use of shorter filter packs for reduced total filtration cost
  • Transportation
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      069095
    • NMFC Class
      175.5
    • NMFC Sub
      02
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100206412
  • UPC/ISBN
    00638060354414

Flexible Line Plumbing KitWe design and manufacture our hardware and accessories with extended service life, exceptional durability, and ease of cleaning in mind. The system has inlet and outlet ports on the housing head, which must be reduced to allow access for installation and for removal of the pack. For optimal performance, high pressure stainless steel flexible plumbing should be used instead of hard" piping. We offer a standard plumbing kit that includes the threaded hose, ball-valves, all connectors, and pressure gauges to connect with no need for additional parts. System Flushing ElbowCleaning conventional filter housings requires solvent use. With the CUNO™ CTG-Klean system, the process liquid does not come in contact with the housing, so it is only necessary to flush the inlet and outlet plumbing. These lines, connected by the flushing elbow, can be flushed with the CUNO™ CTG-Klean system off-line. The stainless steel flushing elbow is available for all CUNO™ CTGKlean system filter housing configurations and is supplied with one or two fluorocarbon O-rings. Housing Volume ReducerIn processes where the batch size can vary or where process changes reduce the contaminant load, fewer filter cartridges could be used if a smaller housing were available. The CUNO™ CTGKlean system Volume Reducer drives down the cost of filtration by allowing the use of shorter filter packs to cut the total filtration cost. The volume reducer is available for the 3WTS and 7WTS configurations to allow use of a single high filter pack within the two-high housing (3WTS2 and 7WTS2), or a two-high filter pack in the three-high housing (3WTS3 and 7WTS3). Tilting DeviceOur tilting mechanism provides greater ease of use and the recovery of up to 95% of the hold-up volume from the filter pack. It also helps in lifting the potentially heavy used filter pack for ease of removal from the housing. And our durable stainless steel construction makes the tilting device ideal for stand-alone or skid mounted service. CUNO™ CTG-Klean System Housing DimensionsThe CUNO™ CTG Klean System housings are available in one-around, three-around, and seven-around sizes, with varying filter pack heights. The 3M™ 1WTS is a one-around housing that is configurable to hold a 10" or 20" cartridge filter pack lengths. The three-around 3WTS housings can be configured to hold either a 10", 20", or 30" cartridge. The largest housing is the 7WTS, which is a seven-around housing that is configurable to 10", 20" or 30" cartridge length filter pack. Our complete CUNO™ CTG-Klean system design is engineered to minimize operator exposure to the fluid and reduce the time and labor required for cleaning, and our line of hardware and accessories extend the capabilities of the system while preserving these cost-saving features.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.