3M™ Dirt Trap Clear Film Dispenser, 36863, 1 per case

3M™ Dirt Trap Clear Film Dispenser conveniently stores and dispenses 3M™ Dirt Trap Clear Film. Our dispenser comes with high-strength magnets that secure the unit on vertical metal surfaces while the clear film is dispensed and applied. Use this accessory with 18 inch wide rolls of clear film to protect lights and windows from overspray.
Price: $62.41

(Case of 1 Each)

  • $62.41
  • Case of 1 - $62.41
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      2.523 lbs
    • SKU
      7100173136
    • UPC/ISBN
      00051131368637
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100173136
  • 3M ID
    60455102032
  • UPC
    00-51131-36863-7
  • Product Formal Name
    3M™ Dirt Trap Clear Film Dispenser, 36863, 1 per case
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Country of Origin
    China
  • Return Policy
    No Return
  • Box Length (in)
    7.1
  • Box Width (in)
    21
  • Box Height (in)
    5.9
  • Bullets
    • Bullet 1
      - An approved component of the 3M™ Dirt Trap Protection System
      - Conveniently dispenses 3M™ Dirt Trap Clear Film
      - High-strength magnets secure unit on vertical metal surfaces
      - Magnets allow moving dispenser to new locations
      - Durable metal construction for use in automotive paint shops
  • SKU
    7100173136
  • UPC/ISBN
    00051131368637

3M™ Dirt Trap Clear Film Dispenser makes it easy to unroll just the right length of 18" wide 3M™ Dirt Trap Clear Film (sold separately), which is specifically designed to protect lights and windows from overspray buildup in a paint booth or garage. The clear film will not block light from a bulb or window, but creates a protective barrier that can be peeled away once an overspray buildup develops. Our dispenser is made from metal for durability and comes with high strength magnets that secure it on vertical metal surfaces. Simply place the dispenser where desired and unroll the film. The magnets allow relocating the dispenser to another site if desired.Unprotected lights and windows in an area where paint is being sprayed are likely to become coated with overspray, which can obscure light sources over time. Shielding lights and windows is easy with 3M™ Dirt Trap Clear Film. The film comes with an adhesive backing that clings to surfaces, eliminating the need to fasten the film with tape or other attachment methods. The adhesive is specially formulated to release when pulled by hand, allowing easy removal of film coated with paint overspray, dust or dirt. What ,s left behind is a clean light bulb or window that does not need time-consuming and labor intensive cleaning by scraping off a layer of paint.Directions for installing 3M Dirt Trap Clear FilmImportant - Scrape and clean glass surfaces thoroughly before installationCover the edge of the installation squeegee with 3M™ Dirt Trap material to reduce the drag on the clear filmPlace dispenser (PN 36863) below the window or lightPull film up and over glass and use the squeegee to applyStart at the top near the center and work out to the edges as you smooth and remove air pockets and wrinklesTrim edges with a cutterOptional - Installation may be done using glass cleaner or water/alcohol solution to improve film handling.Replace film when heavily coated with overspray

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M Dirt Trap Tools