3M™ Engineer Grade Prismatic Reflective Sheeting 3432 Red, 36 in x 50 yd
Made with significantly less VOCs, waste and energy use than glass bead sheeting
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
Lead Time5
-
Manufacturer3M
-
SAP7000042537
-
3M ID75030169413
-
UPC00-51141-29371-4
-
Product Formal Name3M™ Engineer Grade Prismatic Reflective Sheeting 3432 Red, 36 in x 50 yd
-
Case UnitCase of 4
-
Unit of MeasureRoll
-
Part Number3432-36-50;343236
-
Estimated Lead Time5
-
Size36 in x 50 yd
-
ColorRed
-
Inventory Status CodeN
-
Country of OriginUSA
-
Return PolicyNo Return
-
Width36 in
-
Length50 yd
-
Box Length (in)39.5
-
Box Width (in)10.3
-
Box Height (in)11.7
- Bullets
-
Bullet 13M™ Engineer Grade Prismatic Reflective Sheeting Series 3400 Series exceeds reflectivity within the engineer grade class;Robust design aids hand application to large substrate sheets;Reliable performance of polycarbonate cube corners;Meets and exceeds ASTM D4956 Type I specification;Better daytime and nighttime brightness than engineer grade with glass bead optics;Performance life of seven years;Made with significantly less VOCs, waste and energy use that glass bead sheeting
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3919905010
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item150930
-
NMFC Class085.0
-
NMFC Sub01
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.