3M™ Thermally Conductive Interface Tape 8926-05, 600 mm x 40 m x 0.5 mm, 1/Case

3M™ Thermally Conductive Interface Tape 8926-05 is a 0.5 mm pressure-sensitive tape designed to have good converting ability, handing and re-workability through the introduction of a thin PET carrier. 3M tape Series 8926 is designed with a soft acrylic polymer and multiple thickness options to allow excellent wet-out or conformability to many surfaces.
Price: $1785.24

(Case of 1 Roll)

  • $1785.24
  • Case of 1 - $1785.24
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      56.2 lbs
    • SKU
      7100100145
    • UPC/ISBN
      18806080063688
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100100145
  • 3M ID
    WT600913345
  • UPC
    88-06080-06368-8
  • Product Formal Name
    3M™ Thermally Conductive Interface Tape 8926-05, 600 mm x 40 m x 0.5 mm, 1/Case
  • Case Unit
    Case of 1
  • Unit of Measure
    Roll
  • Product ID
    8926
  • Estimated Lead Time
    2
  • Size
    23-5/8 in x 43-3/4 yd
  • Inventory Status Code
    S
  • Data Sheet
    https://multimedia.3m.com/mws/media/1358051J/3m-thermally-conductive-interface-tape-8926-series-led-flyer.jpg
  • Technical Information
    https://multimedia.3m.com/mws/media/1122894J/3m-thermally-conductive-interface-tape-8926-series.jpg
  • Country of Origin
    South Korea
  • Return Policy
    No Return
  • Width
    23-5/8 in
  • Length
    43-3/4 yd
  • Box Length (in)
    25.98
  • Box Width (in)
    8.07
  • Box Height (in)
    8.07
  • Bullets
    • Bullet 1
      - Good thermal conductivity (>1.5W/m-K)
      - Excellent dielectric performance
      - Low thermal impedance
      - Good and reliable adhesion performance to Al and SS
      - Vibration damping
      - Can be used for heat management
      - Can be used for general heat dissipation
      - Can be used for bonding / joining parts
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      3506915000
    • UNSPSC Code
      31201500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      056970
    • NMFC Class
      077.5
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100100145
  • UPC/ISBN
    18806080063688

3M™ Thermally Conductive Interface Tape 8926-05 has good adhesion performance to many substrate types and has excellent dielectric performance. Standard Lead Time: 45 Calendar Days

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.