3M™ Polycarbonate Carrier 3000, Prototype, 24 mm x 50 m
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time25
-
Manufacturer3M
-
SAP7100208843
-
UPC00-51111-90637-8
-
Product Formal Name3M™ Polycarbonate Carrier 3000, Prototype, 24 mm x 50 m
-
Case UnitCase of 2
-
Unit of MeasureRoll(s)
-
Product ID3000
-
Estimated Lead Time25
-
Size1 in x 164 ft
-
ColorBlack
-
Inventory Status CodeN
-
Country of OriginSingapore
-
Return PolicyNo Return
-
Width1 in
-
Length164 ft
-
Box Length (in)13
-
Box Width (in)13
-
Box Height (in)24
- Bullets
-
Bullet 1Black, splice free, polycarbonate carrier with a typical surface resistivity at E5 ohms/sq., and precisely formed pockets to ensure component fit per ANSI/EIA guidelines;Good impact strength and resistance for improved component protection;Lower shrinkage percentage than such materials as polyester providing stable pocket dimension after formation;Suitable for static-sensitive components;Broad selection of pocket designs and dimensions to accommodate various electrical and electronic components. Customized designs and dimensions are also available per your requirements;Compatible with 3M™ Pressure Sensitive Adhesive Cover Tapes and 3M™ Heat Activated Adhesive Cover Tapes with good sealing and peeling performance;Available in widths of 8 mm - 44 mm in planetary format. Long level-winding reels are available for most 8 mm and 12 mm
-
- Transportation
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item156600
-
NMFC Class000.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.