3M™ EMI Absorber AB7050HF, 210 mm x 297 mm
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100084010
-
3M IDWX300944146
-
UPC88-06080-03806-1
-
Product Formal Name3M™ EMI Absorber AB7050HF, 210 mm x 297 mm
-
Case UnitCase of 50
-
Unit of MeasureSheet
-
Estimated Lead Time2
-
Inventory Status CodeS
-
Technical Informationhttps://multimedia.3m.com/mws/media/960654O/3m-emi-absorber-ab7000hf-series-halogen-free.pdf&fn=EMI Absorber AB7000HF Series Data Sheet_R2.pdf
-
Country of OriginSouth Korea
-
Return PolicyNo Return
-
Box Length (in)11.2
-
Box Width (in)14.8
-
Box Height (in)4.5
- Bullets
-
Bullet 1- Flexible, high permeability magnetic sheets
- One-sided acrylic pressure-sensitive adhesive
- Low Halogen version of AB7000 Series absorbers
- Less than 900 ppm bromine and chlorine
- Less that 1500 ppm total bromine and chlorine
- Meets guidelines set forth in IEC 61249-2-21
- Easily die-cut into complex shapes
- Consists of a flexible polymer resin loaded with soft metal flakes
- Acrylic pressure-sensitive adhesive allows for easy application
- Improved lower frequency absorber vs. the AB5000 or AB5000S Series (@ < 1 GHz)
- Reduce EMI and RF noise in electronic systems
- Apply to noisy traces, IC's and reflective surfaces in an enclosure
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3919905060;7326908688
-
UNSPSC Code31201500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item156600
-
NMFC Class060.0
-
NMFC Sub11
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7100084010
-
UPC/ISBN00051141415635
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.