3M™ Cold Shrink Insulator 8426-9M, 2-4/0 AWG (30-90 mm²), 10/Case

3M™ Cold Shrink Connector Insulators 8420 and 8430 Series are designed using 3M’s proprietary cold shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwinding) after positioning the splice allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated EPDM material promotes a permanent, durable environmental seal and insulation, with a typical operating temperature range from -40–194°F (-40–90°C). The 8420 insulator meets requirements of ANSI C119-1 and Western Underground Guide 2.14 for secondary splices rated up to 1 kV. Applications: Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated to 1000 V. Good for repairs and environmental sealing for communication and other non-electrical applications. Important: Use insulation jacket or connector O.D. for final ordering criteria. * Mastic pads included for cable O.D. build-up. ** Kit contains adapters. *** These sizes are listed for availability only and are not designed to be used as primary insulation. These tubes are for conduit sealing and breakouts. ****Maximum connector length: 5.625” “Point of Purchase” packaging designated by “P”. Example: 8423-6P
Price: $278.55

(Case of 10 Each)

  • $278.55
  • Case of 10 - $278.55
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      2.554 lbs
    • SKU
      7000132877
    • UPC/ISBN
      00054007434368
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000132877
  • 3M ID
    80611200355
  • UPC
    00-54007-43436-8
  • Product Formal Name
    3M™ Cold Shrink Insulator 8426-9M, 2-4/0 AWG (30-90 mm²), 10/Case
  • Case Unit
    Case of 10
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Technical Information
    https://multimedia.3m.com/mws/media/41645J/3m-cold-shrink-connector-insulators-8420-series.jpg
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    14.4
  • Box Width (in)
    8.4
  • Box Height (in)
    5.8
  • Bullets
    • Bullet 1
      - Specially designed for primary insulation of solid dielectric insulated wires and cable splicing rated to 1000 volts
      - Simple installation which requires no tools
      - Sealing of terminal lug barrels, conduit couplings and conduit-to-cable breakouts
      - Made of black EPDM rubber
      - Made of EPDM rubber which contains no chlorides or sulfur
      - Withstands temperatures of -40 to 194 degrees F (-40 to 90 degrees C)
      - Environmental sealing for communication and other non-electrical applications
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8546900000
    • UNSPSC Code
      31270000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      061205
    • NMFC Class
      110.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000132877
  • UPC/ISBN
    00054007434368

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.