3M™ Cold Shrink Rubber Splice Kit 5553, Tape/Wire/UniShield® Shielding, 5/8 kV, 500-1000 kcmil (Cu or Al), 23 in, 1/Case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
Lead Time2
-
Manufacturer3M
-
SAP7000021419
-
3M ID80610735286
-
UPC00-54007-09091-5
-
Product Formal Name3M™ Cold Shrink Rubber Splice Kit 5553, Tape/Wire/UniShield® Shielding, 5/8 kV, 500-1000 kcmil (Cu or Al), 23 in, 1/Case
-
BrandUniShield
-
Case UnitCase of 1
-
Unit of MeasureKit
-
Part Number5553
-
Estimated Lead Time2
-
Inventory Status CodeS
-
Technical Informationhttps://multimedia.3m.com/mws/media/41625J/cold-shrink-rubber-splicing-kits-5550-series.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM82ZMY_e4v70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)26.9
-
Box Width (in)11
-
Box Height (in)10.6
- Bullets
-
Bullet 1- Provides splicing on tape shield, wire shield and UniShield® cables
- This kit is suitable for use on solid dielectric cables, indoor or outdoor locations and direct-burial applications
- Insulator and jacket is made of EPDM for easy installation
- Rated for 5/8 kV applications
- IEEE Approved
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number8536908585
-
UNSPSC Code31270000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
-
NMFC Item061205
-
NMFC Class110.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT RESTRICTED, AS PER SPECIAL PROVISION A197, ENVIRONMENTALLY HAZARDOUS SUBSTANCE EXCEPTION
-
International Maritime OrganizationNOT RESTRICTED, AS PER IMDG CODE 2.10.2.7, MARINE POLLUTANT EXCEPTION
-
Flashpoint TransportNo Flash Point
-
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.