3M™ Perfect-It™ EX Ultrafine Machine Polish, 06069, 1 gal, 4 per case

Our 3M™ Perfect-It™ EX Ultrafine Machine Polish quickly and completely removes ultrafine swirl marks, even on difficult dark-colored vehicles. It stays wet longer, letting you use less material for a refined finish. Yet it also holds better on the pad for reduced sling and faster cleanup. You get polished surfaces without machine polish swirl marks – all at lower material costs and process times.
Price: $735.47

(Case of 4 Bottle)

  • $735.47
  • Case of 4 - $735.47
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      32.279 lbs
    • SKU
      7100153646
    • UPC/ISBN
      00051131060692
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100153646
  • 3M ID
    60455101661
  • UPC
    00-51131-06069-2
  • Product Formal Name
    3M™ Perfect-It™ EX Ultrafine Machine Polish, 06069, 1 gal, 4 per case
  • Brand
    Perfect-It
  • Case Unit
    Case of 4
  • Unit of Measure
    Bottle
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Technical Information
    https://multimedia.3m.com/mws/media/1798150J/3m-perfect-it-ex-ultrafine-machine-polish-tds-06097-39062-06068-06069.jpg
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xmx_Sl8mGPv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    15
  • Box Width (in)
    10.3
  • Box Height (in)
    11.3
  • Bullets
    • Bullet 1
      - 3M’s highest-performing machine polish for removing ultrafine swirl marks
      - Quickly and completely removes machine polish swirls, even on black vehicles
      - Longer wet time – technicians use less material, saving money
      - Holds better on polishing pads for reduced sling, mess and cleanup time
      - Part of the 3M™ Perfect-It™ Paint Finishing System for showroom grade finishes
  • Transportation
    • ECCN Number
      EAR99
    • UNSPSC Code
      25000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      033440
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      MAINTAIN TEMP ABOVE 32F (0C)
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100153646
  • UPC/ISBN
    00051131060692

More Wet Time, Less SlingYou never thought one machine polish could deliver both of these important advantages during final paint finishing – until now. Our 3M™ Perfect-It™ EX Ultrafine Machine Polish stays wet longer on the substrate, meaning you don’t need to keep reapplying it and using valuable product during the process of machine polishing and swirl removal. This can be especially important in places where heat and humidity are common inside or outside of the shop. Yet the polish also holds better on the pad, reducing the mess, waste and cleanup time associated with sling. Quite simply, our Perfect-It™ EX Ultrafine Machine Polish is our highest-performing machine polish for better material cost efficiency, lower process times and refined, swirl-free final paint finishes.An Excellent Finish, FastAs the final step of a truly professional vehicle paint finish, our Perfect-It™ EX Ultrafine Machine Polish quickly and completely removes ultrafine machine polish swirls even on the most difficult black or dark-colored vehicles. At its heart is aluminum oxide, the same mineral used in many of our top-performing abrasive discs and sheets. In fact, fine grade aluminum oxide discs are part of the Scratch Refinement stage of our Perfect-It™ Paint Finishing System, which includes our EX Machine Polishes. This abrasive cuts quickly and uniformly in a very fine grade to remove ultrafine swirl marks left during the machine polishing process.Part of the 3M™ Perfect-It™ Paint Finishing System3M™ Perfect-It™ EX Ultrafine Machine Polish is integral to our 3M™ Perfect-it™ Paint Finishing System. Developed to keep pace with evolving paint and clear coat technologies, the Perfect-it™ Paint Finishing System is ideal when the finest finish is required for every level of clear coat and paint repair. This system uses a progressive series of abrasives, buffing and compounding pads, and specially formulated polishes across four stages of repair to produce showroom grade finishes with deep color and rich gloss.For the best swirl-free finish on all colors, we recommend using Perfect-It™ EX Ultrafine Machine Polish with a blue Perfect-It™ Quick Connect Ultrafine Polishing Pad, PN05708 or PN33286.The Science of Better Paint Finishing from 3MWith its formula that stays wet and still reduces sling, our Perfect-It™ EX Ultrafine Machine Polish is an integral part of our Perfect-It™ EX Paint Finishing System of polishes and pads, as well as our overall Perfect-it™ Paint Finishing System which also includes advanced abrasive discs and cloths. For ultrafine swirl mark elimination and polishing even on black vehicles, it is another example of how 3M applies science to the lives of collision repair professionals, consistently improving your efficiency, throughput and value as you prepare painted surfaces.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.