3M™ Accuspray™ Atomizing Head, 16615, Blue, 1.2 mm, 4 per kit, 6 kits per case

3M™ Accuspray™ Atomizing Heads are designed specifically for use with 3M™ Accuspray™ ONE Spray Guns. This selection of replaceable heads makes for the incredibly fast, efficient application of low-, medium- and high-viscosity materials from one gun. Technicians simply remove and replace the head for the performance of a new spray gun on demand. See-through heads are easily cleaned and reused.
Price: $162.39

(Case of 6 Kit)

  • $162.39
  • Case of 6 - $162.39
Qty:  
OR
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      1.853 lbs
    • SKU
      7100086837
    • UPC/ISBN
      00051131166158
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100086837
  • 3M ID
    60455080998
  • UPC
    00-51131-16615-8
  • Product Formal Name
    3M™ Accuspray™ Atomizing Head, 16615, Blue, 1.2 mm, 4 per kit, 6 kits per case
  • Brand-old
    Accuspray
  • Brand
    Accuspray
  • Case Unit
    Case of 6
  • Unit of Measure
    Kit
  • Estimated Lead Time
    2
  • Color-old
    Blue
  • Inventory Status Code
    S
  • Data Sheet
    https://multimedia.3m.com/mws/media/1280099J/3m-accuspray-one-spray-gun-system-with-pps.jpg
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    10.5
  • Box Width (in)
    7.2
  • Box Height (in)
    6.1
  • Bullets
    • Bullet 1
      - Selection of replaceable atomizing heads for application of very low- to high-viscosity coatings
      - Allows for spraying of primer, sealer, base and clear coat from ONE gun
      - Fast, simple head replacement – the performance of a brand new spray gun on demand
      - See-through design makes it easy to see when the heads are clean
      - Works with 3M™ Accuspray™ ONE and PPS™ Systems
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8424909080
    • UNSPSC Code
      25000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      156600
    • NMFC Class
      125.0
    • NMFC Sub
      05
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100086837
  • UPC/ISBN
    00051131166158

Replaceable Atomizing Heads for a Full Range of Paint and CoatingsDesigned to provide the ideal atomization for a wide range of spray coatings, 3M™ Accuspray™ Atomizing Heads are an integral part of our 3M™ Accuspray™ ONE Spray Gun system. These replaceable, reusable atomizing heads are incrementally sized for ideal atomization, whether you’re applying low-viscosity coatings such as waterborne, solvent basecoat paint, or higher-viscosity coatings such automotive primers or adhesives. These heads are easily cleaned and reused, or can be quickly removed and replaced for the performance of a new spray gun on demand.Each replaceable atomizing head is molded from clear plastic so technicians can easily see when the head is clean to reduce cleanup times. A color tint is added for easy size identification. These atomizing heads are suitable for applications in collision repair as well as aerospace, marine and general industrial. This product is designed specifically for use with Accuspray™ ONE Spray Guns. The selection of 3M™ Accuspray™ Atomizing Heads includes:1.2 and 1.3 mm 3M™ Accuspray™ Atomizing Heads are excellent for low-viscosity coatings and reduced overspray in hot and humid environments. Use them for applying waterborne and solvent basecoat paints in thin clear coats, as well as stains, varnishes, mold release agents, aerospace and marine top coats, and other fluids requiring very fine atomization. These heads contain atomizing air holes in the air caps to achieve the highest possible finish quality. 1.4 mm atomizing heads deliver fine atomization with minimal overspray, making it ideal for lower-viscosity materials such as automotive sealer, paint, topcoats, lacquers and light adhesives.1.8 mm replaceable atomizing heads are ideal for med-viscosity to hi-viscosity coatings such as auto primers, lacquers and adhesives. 2.0 mm atomizing heads are typically used with our 3M™ Accuspray™ HGP Spray Gun, built specifically for applying high-volume, high-viscosity fluids. Use these heads for applying gel coats, adhesives, undercoatings, high build primers, specialty and sound dampening coatings.ONE Solution to Real-World Needs of the Automotive and Industrial Painter3M™ Accuspray™ Atomizing Heads work with the Accuspray™ ONE Spray Gun, a central part of the 3M™ Accuspray™ ONE System for paint and fluid applications including automotive collision repair. Replaceable atomizing heads are clear, so it’s easy to see when the head is clean, and the spray guns perform like new every time the atomizing head is replaced – the equivalent of a new spray gun, at a fraction of the cost. The benefits include reduced primer consumption, lower application time and less time for cleanup, plus a better finish which results in less sanding time. The end result: cleaner, more productive, more profitable collision repair operations.3M™ Accuspray™ ONE and the 3M™ PPS™ SystemReplaceable atomizing heads and Accuspray™ ONE Spray Guns work hand-in-hand with our 3M™ Paint Preparation System (PPS™), an all-in-one closed system for mixing/measuring, filtering, sealing and protecting coatings while not in use.No Need to Spend on Extra Mixing Cups, Filters and StrainersPPS™ eliminates the inefficient process of mixing paint and other materials separately and transferring them through filters and other equipment where product gets left behind, unused. Instead, paint and other materials are mixed and sprayed out of the same cup with a PPS™ liner, lid and built-in filter. You simply place a disposable liner within a re-usable paint cup. Then m

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M PPS Paint Preparation System
3M Paint Cup
3M Spray Adhesive Products
3M PPS Paint Preparation System Tech Tips

Customers who bought this product also bought

Customers who viewed this product bought