• 0
3M™ Performance Spray Gun Ball Valve 26839, 4/Case

3M™ Performance Spray Gun Ball Valve 26839, 4/Case

Allows for spray gun removal or nozzle replacement without disabling the pressure source;Attaches between whip hose and supply hose in a pressure feed configuration;Ball valve lets the painter stop fluid flow to spray gun;Seals are compatible with both solvent-based and waterborne coatings
Price: $389.40

(Case of 4 Each)

  • $389.40
    • Case of 4 - $389.40
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    Learn more
    • Weight
      0.619 lbs
    • SKU
      7100228103
    • UPC/ISBN
      00051131268395
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100228103
  • 3M ID
    60455108815
  • Product Formal Name
    3M™ Performance Spray Gun Ball Valve 26839, 4/Case
  • Case Unit
    Case of 4
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    9.4
  • Box Width (in)
    6.4
  • Box Height (in)
    4.8
  • Bullets
    • Bullet 1
      - Ball valve lets the painter stop fluid flow to Spray gun
      - attaches between whip hose and supply hose in a pressure feed Configuration
      - seals are compatible with both solvent-based and waterborne coatings
      - Allows for Spray gun removal or nozzle replacement without disabling the pressure source
  • SKU
    7100228103
  • UPC/ISBN
    00051131268395

The addition of a 3M™ Performance Spray Gun Ball Valve allows a painter to quickly stop flow of liquid to the 3M™ Performance Spray Gun when the spray gun is set up as a pressure feed sprayer. This valve is recommended whenever the painter cannot easily access the pressure source (e.g. on a ladder or a long distance away). The lightweight valve is compatible with both waterborne and solvent-based coatings. It attaches to the whip hose at the bottom end of the spray gun handle. Valve has one male and one female threaded fitting. The quarter-turn handle aligns parallel to the hose when it is open, perpendicular when it closed. Use with the 3M™ Performance Spray Gun, an innovative solution designed with the industrial painter in mind. Made from an impact-resistant composite, it is one of the lightest spray guns in the industry, yet durable enough for demanding industrial conditions. Its versatile design allows painters to spray from a pressurized source or a gravity cup, and replaceable atomizing heads allow you to spray a full range of coatings while delivering like-new performance with every new nozzle.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.