3M™ Accuspray™ Spray Gun Kit HGP, 16587, 1 per case

Our 3M™ Accuspray™ HGP Spray Gun Kit features an HVLP gravity pressurized spray gun body built specifically for applying high viscosity fluids in collision repair. The kit includes an Accuspray™ HGP pressurized spray gun and two each of 1.8 mm and 2.0 mm atomizing heads that allow for full, consistent spray patterns and low overspray. The kit is ideal for use with Accuspray™ H/O Pressure Cups.
Price: $290.63

(Case of 1 Kit)

  • $290.63
  • Case of 1 - $290.63
Qty:  
OR
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      1.752 lbs
    • SKU
      7000120108
    • UPC/ISBN
      00051131165878
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000120108
  • 3M ID
    60455067219
  • UPC
    00-51131-16587-8
  • Product Formal Name
    3M™ Accuspray™ Spray Gun Kit HGP, 16587, 1 per case
  • Brand-old
    Accuspray
  • Brand
    Accuspray
  • Catalog Product Category
    Paint Spray Equipment & PPS
  • Case Unit
    Case of 1
  • Unit of Measure
    Kit
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Country of Origin
    USA
  • Applications
    Paint Application
  • Sub Applications
    Painting
  • Return Policy
    No Return
  • Box Length (in)
    10.8
  • Box Width (in)
    8.3
  • Box Height (in)
    2.9
  • Bullets
    • Bullet 1
      Designed for use with 3M™ PPS™ Type H/O Pressure Cups, excellent for high-viscosity coatings
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8424209000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      177680
    • NMFC Class
      092.5
    • NMFC Sub
      03
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000120108
  • UPC/ISBN
    00051131165878

Durable, Lightweight Equipment for Applying Medium-Heavy Coatings Designed specifically for use with  3M™ PPS™ Type H/O Pressure Cups (sold separately) and featuring an  Accuspray™ HGP spray gun body and replaceable atomizing heads, our 3M™ Accuspray™ HGP Spray Gun Kit contains equipment for efficient and effective application of high volume, high viscosity coatings. This kit contains the lightweight gun body, two 1.8 mm replaceable atomizing heads, two 2.0 mm replaceable atomizing heads and an air control valve. This kit forms a premium HVLP gravity pressurized application system for gel coats, adhesives, undercoatings, high build primers, specialty and sound dampening coatings. Teh Accuspray™ HGP Spray Gun is packaged with 1.8 mm and 2.0 mm Accuspray™ Replaceable Atomizing Heads for a smooth, consistent spray pattern lets you build mil thicknesses quickly, and greatly limits overspray for reduced product waste and less cleanup time. It also works with smaller size atomizing heads (1.2, 1.3 and 1.4 mm). A Spray System That Pays Off The atomizing heads used with the Accuspray™ HGP Spray Gun are a big part of our 3M™ Accuspray™ System for automotive collision repair. Replaceable atomizing heads are see-through so it’s easy to see when the head is clean, and the spray guns perform like new every time the atomizing head is replaced – the equivalent of a new spray gun, at a fraction of the cost. The benefits include reduced primer consumption, lower application time and less time for cleanup, plus a better finish which results in less sanding time. The end result: cleaner, more productive, more profitable collision repair operations. Accuspray™ and Our PPS™ System The 3M™ Paint Preparation System is an all-in-one closed system for mixing/measuring, filtering, sealing and protecting. No Need to Spend on Extra Mixing Cups, Filters and Strainers This system eliminates the inefficient process of mixing paint and other materials separately and transferring them through filters and other equipment where product gets left behind, unused. Instead, paint and other materials are mixed and sprayed out of the same cup with a PPS™ liner, lid and built-in filter. You simply place a disposable liner within a re-usable paint cup. Then mix the paint in the PPS™ liner, snap the disposable lid (with built-in filter) in place and attach the locking collar to complete the PPS™ System. With just a quick quarter-turn, the assembly easily attaches to the spray gun body. Once you’re finished spraying, simply remove the liner from the cup and discard it. It’s that simple. And each PPS™ cup can be used for temporary protection of liquid coating materials for continued use – just use the included sealing plug. This system lets painters mix less paint, drastically reduce their solvent use, and spend less time cleaning spray guns and cups. It even lets them spray in any direction, including upside down, for consistent coverage and improved material usage. All told, the PPS™ system can improve operator efficiency by as much as 15%, and can save up to 70% on solvent usage alone. All of this adds up to a very clear cost savings across your operation. The Science of Better Spray Systems from 3M We put decades of scientific and real-life study into our 3M™ Accuspray™ HGP Spray Gun Kit to help make spray application easier and save collision repair and other professionals time and money at every step.  Every feature – from the lightweight composite spray gun body that eliminates maintenance kits to its replaceable atomizing heads – is another example of what makes every 3M product successful: Science. Applied to Life. ™

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M PPS Paint Preparation System
3M Paint Cup
3M Spray Adhesive Products
3M PPS Paint Preparation System Tech Tips

Customers who bought this product also bought

Customers who viewed this product bought