Kits for Added Efficiency with 3M™ PPS™Excellent for efficiently stocking PPS™ lids, liners and related components, 3M™ PPS™ Lid & Liner Kits contain disposable lids, disposable liners, and sealing plugs specifically for use with the 3M™ PPS™ (Legacy) paint preparation system. Each PPS lid features a welded-in filter which effectively strains paint material during application. Choose lids with 125 micron filters, which are often recommended for waterborne paint materials; or 200 micron filters for traditional solvent-based paint materials. Always reference your paint manufacturer to ensure the recommended filter to strain the material.Lids and liners are sized specifically for the range of 3M™ PPS™ Cups & Collars, allowing technicians to mix up to 28 fluid oz (850 mL). Correct mixes are best achieved when also using with a 3M™ PPS™ Mix Ratio Insert, or a weight scale. Mix ratio film inserts are sold separately. Lid and liner sizes include: 3M™ PPS™ Lid & Liner Kit Micro Size – 50 lids, 50 liners and 20 sealing plugs for use with 3 fluid oz (90 mL) PPS™ Cups & Collars, ideal for spot repairs 3M™ PPS™ Lid & Liner Kit Mini Size – 50 lids, 50 liners and 20 sealing plugs for use with 6 fluid oz (180mL) PPS™ Cups & Collars, excellent for 1-panel repairs 3M™ PPS™ Lid & Liner Kit Midi Size – 50 lids, 50 liners and 20 sealing plugs for use with 13.5 fluid oz (400mL) PPS™ Cups & Collars, great for 2-panel repairs3M™ PPS™ Lid & Liner Kit Standard Size – 50 lids, 50 liners and 20 sealing plugs for use with 22 fluid oz (650mL) PPS™ Cups & Collars, excellent for 3-panel repairs 3M™ PPS™ Lid & Liner Kit Large Size – 25 lids, 25 liners and 10 sealing plugs for use with 28 fluid oz (850mL) PPS™ Cups & Collars, ideal for 4-panel repairs3M™ PPS™ UV Standard Lid & Liner Kits are also available, featuring PPS™ lids, liners and sealing plugs in black instead of transparent to keep out UV light. These kits are recommended for use when applying UV light curing materials such as primer, sealer, base-coat and clear coats.Advantages of the 3M™ PPS™ SystemUnlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™Cup. Then simply mix the paint in the PPS™disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™System. With just these few simple steps, you#39;re ready to start spraying.Your Spray Gun Functions at any Angle, Even Upside DownPPS™allows the painter to spray consistently 90 to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.Clean Up is a Breeze and Uses Less SolventAfter spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard the disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS