3M™ PPS™ Type H/O Pressure Cup, 16121, Mini, 4 cups per case

3M™ PPS™ Type H/O Pressure Cup is a pressurized (H/O) hard cup and collar set that supports and holds 3M™ PPS™ flexible liner used in the 3M™ PPS™ (Legacy) paint preparation system. This product is intended for use in place of metal cups on most pressure spray guns. Available sizes include Mini - 6 oz. and Large - 28 oz. cups.
Price: $179.44

(Case of 4 Kit)

  • $179.44
  • Case of 4 - $179.44
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      2.053 lbs
    • SKU
      7000119727
    • UPC/ISBN
      00051131161214
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000119727
  • 3M ID
    60455034680
  • UPC
    00-51131-16121-4
  • Product Formal Name
    3M™ PPS™ Type H/O Pressure Cup, 16121, Mini, 4 cups per case
  • Brand-old
    PPS
  • Brand
    PPS
  • Catalog Product Category
    Paint Spray Equipment & PPS
  • Case Unit
    Case of 4
  • Unit of Measure
    Kit
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Data Sheet
    https://multimedia.3m.com/mws/media/1025781O/pps-paint-preparation-system-adapter-pdf-file.pdf&fn=60-4402-7849-1.pdf
  • Country of Origin
    USA
  • Applications
    Paint Application
  • Sub Applications
    Painting
  • Return Policy
    No Return
  • Box Length (in)
    7.8
  • Box Width (in)
    7.8
  • Box Height (in)
    6.8
  • Bullets
    • Bullet 1
      - Pressurized hard cups and collars use with 3M™ PPS™ (Legacy) paint preparation system
      - Designed to efficiently spray thick, high viscosity liquids
      - 3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials
      - System enables the painter to consistently spray at 90° to the part, no matter the part orientation (even upside down)
      - The all-in-one solution reduces the chance of outside contamination and reduces paint consumption
      - PPS™ reduces cleaning solvent consumption up to 70% and reduces prep and clean-up time by 50%
      - System delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8424909080
    • UNSPSC Code
      25000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      156600
    • NMFC Class
      100.0
    • NMFC Sub
      06
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000119727
  • UPC/ISBN
    00051131161214

Cup and Collars Support Liners3M™ PPS™ Type H/O Pressure Cup is a component setfor use with the 3M™ PPS™ (Legacy) paint preparation system. 3M™PPS™is a complete painting system that allows the painter to measure, mix, filter, and spray paint materials.These items are hard plastic cups and collars that provide support for3M™PPS™flexible liners. These pressurized cups are often used as replacements for metal cups commonly found on many automotive paint spray guns. Our reusable pressurized PPS™Type H/O Pressure Cups excel at applying high viscosity coatings. Type H/O cups effectively work with thick liquid materials that require pressure assist in gravity-filled delivery systems.Advantages of the 3M™ PPS™SystemUnlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™Cup. Then simply mix the paint in the PPS™disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™System. With just these few simple steps, you#39;re ready to start spraying.Your Spray Gun Functions at any Angle, Even Upside DownPPS™allows the painter to spray consistently 90 to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.Clean Up is a Breeze and Uses Less SolventAfter spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings.Most guns can be cleaned with less than 3 oz. of solvent.A Versatile System that Works with Most Spray GunsSpecifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun.Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.Reduces the Chance of Contamination Between JobsBecause the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.The Bottom Line: Why 3M is the Paint & Coatings Spray System of Choice3M™ P

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M PPS Paint Preparation System
3M Paint Cup
3M PPS Paint Preparation System Tech Tips