3M™ Overspray Masking Liquid Dry, 06847, 1 Gallon, 4 per case

3M™ Overspray Masking Liquid-Dry (OML-D) is a water-based sprayable liquid that protects against automotive paint and primer overspray without added time for bulk tape masking. It dries to a clear, non-tacky film that bonds lightly, protecting vehicle surfaces and trapping dust and dirt under the film. It s safe to use on all thoroughly cured painted surfaces.

Price: $232.37

(Case of 4 Bottle)

  • $232.37
  • Case of 4 - $232.37
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      37.4 lbs
    • SKU
      7010309222
    • UPC/ISBN
      051131068476
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7010309222
  • 3M ID
    60455066484
  • UPC
    00-51131-06847-6
  • Product Formal Name
    3M™ Overspray Masking Liquid Dry, 06847, 1 Gallon, 4 per case
  • Brand-old
    3M
  • Case Unit
    Case of 4
  • Unit of Measure
    Bottle
  • Product ID
    06847
  • Estimated Lead Time
    2
  • Color-old
    Red
  • Inventory Status Code
    S
  • Data Sheet
    http://multimedia.3m.com/mws/media/920093O
  • Technical Information
    https://multimedia.3m.com/mws/media/920093O/3mtm-overspray-masking-liquid-dry.pdf&fn=TDS_06847, 06851, 06856, 06857_3M™ Overspray Masking Liquid Dry.pdf
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xmxtv4xmU5v70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Applications
    Overspray Protection
  • Sub Applications
    Masking
  • Return Policy
    No Return
  • Box Length (in)
    12.7
  • Box Width (in)
    12.7
  • Box Height (in)
    12.6
  • Bullets
    • Bullet 1
      - protects all vehicle surfaces against automotive paint and primer overspray
      - covers hard-to-mask surfaces quickly and eliminates time-consuming Bulk masking
      - Applies using conventional Spray equipment – No additional costs for liquid masking
      - clear Film keeps vehicles mobile for added shop versatility
      - No Film flutter in booth helps produce cleaner paint jobs
      - Spray liquid cleans up with water for fast, efficient operations
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      3209100000
    • UNSPSC Code
      31200000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      043940
    • NMFC Class
      085.0
    • NMFC Sub
      02
    • Transport Protective Service
      MAINTAIN TEMP ABOVE 32F (0C)
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      >200°F/93°C
  • SKU
    7010309222
  • UPC/ISBN
    051131068476

Cleaner, More Versatile MaskingOverspray Masking Liquid-Dry works with solvent or water-based paint systems to protect vehicle surfaces from automotive primer, sealer, base color and clear coat overspray. This makes it suitable for use in body bays and paint bays during primer or paint application. And the transparent film makes it easy to move the vehicle after application, adding versatility to auto body operations. Helps Save Time and Money from Application through CleanupThe liquid masking sprays on easily using conventional spray guns so no equipment upgrades are needed, and it saves significant shop time for masking hard-to-reach surfaces or for smaller paint jobs that require bulk tape masking. It dries to a clear, non-tacky film in as little as 20 minutes and bonds lightly, protecting vehicle surfaces during paint or primer application and trapping dust and dirt under the film. It is safe to use on all thoroughly cured painted surfaces. Note: Overspray Masking Liquid-Dry is designed to protect automotive surfaces from gentle paint overspray only, and is not intended to protect against a direct hit of paint or primer. Because it dries onto the vehicle surface it eliminates the film flutter that can occur during conventional bulk masking, helping produce cleaner jobs throughout the shop. When primer or paint application is complete, the film simply dissolves and washes off in water for fast, easy cleanup. For best results do not leave on vehicles exposed to the sun.Economical Usage3M™ Overspray Masking Liquid-Dry is available in a variety of sizes from one gallon to 55 gallons. One gallon of OML-D will cover approximately 400 square feet at 4.0 mils wet thickness (or about 4-5 average size vehicles per gallon). The proper wet application rate will yield a dry film thickness of approximately 0.4 mils. The Science for Better Auto Body Paint and Primer Application3M provides liquid masking, another way to apply science for better procedures and better results in auto body repair and maintenance. Our lightly bonding spray-on water-based solution replaces time-intensive masking jobs. And its easy cleanup – it simply dissolves in water and washes off – can make your entire collision repair operation smoother, more versatile and more efficient.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.