3M™ Dirt Trap Material Dispenser, 1 per case

3M™ Dirt Trap Nonwoven Protection Material Dispensers conveniently store and dispense 3M™ Dirt Trap Nonwoven Protection Material. Choose the 3M™ Dirt Trap Material Dispenser, PN36862 or 3M™ Dirt Trap Material Floor Applicator Dispenser, 36864 for smooth, roll-out access to protection material for application to paint booth walls and floors.
Price: $204.52

(Case of 1 Each)

  • $204.52
  • Case of 1 - $204.52
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      9.8 lbs
    • SKU
      7100003285
    • UPC/ISBN
      00051131368620
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100003285
  • 3M ID
    60455050371
  • UPC
    00-51131-36862-0
  • Product Formal Name
    3M™ Dirt Trap Material Dispenser, 1 per case
  • Brand-old
    3M
  • Catalog Product Category
    Paint Booth Protection
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Part Number
    36862
  • Estimated Lead Time
    2
  • Size
    28 in
  • Color-old
    Red
  • Inventory Status Code
    S
  • Country of Origin
    USA
  • Applications
    Paint Preparation
  • Sub Applications
    Booth Protection
  • Return Policy
    No Return
  • Width
    28 in
  • Box Length (in)
    12.9
  • Box Width (in)
    7.4
  • Box Height (in)
    31.7
  • Bullets
    • Bullet 1
      - Designed for use with 3M™ Dirt Trap Protection Material Applicators
      - Conveniently dispenses 3M™ Dirt Trap Nonwoven Protection Material
      - Available for wall and floor applicators
      - High-strength magnets secure unit on vertical metal surfaces
      - Magnets allow moving dispenser to new locations
      - Durable metal construction for use in automotive paint shops
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      7326908688
    • UNSPSC Code
      25000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      095850
    • NMFC Class
      077.5
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      FORBIDDEN 3M U.S. CORPORATE POLICY
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100003285
  • UPC/ISBN
    00051131368620

Smooth Roll-Out Dispensing for Uniform Protection Material ApplicationDesigned for use with3M™ Dirt Trap Protection Material Applicators, our 3M™ Dirt Trap Nonwoven Protection Material Dispensers make it easy to unroll just the right length of 3M™ Dirt Trap Protection Material (sold separately) for smooth application without folds or ripples. Metal dispensers are durable and easy to use - simply place the dispenser where desired and smoothly unroll the material. 3M™ Dirt Trap Material Floor Applicator Dispenser, PN 36864 is fully portable for applying protection material to paint booth. Both the floor dispenser and the 3M™ Dirt Trap Material Dispenser, PN 36862 feature high strength magnets that secure it on vertical metal surfaces. The magnets allow relocating the dispenser to another site if desired.About 3M™ Dirt Trap Nonwoven Protection Material3M™ Dirt Trap Nonwoven Protection Material is specially engineered to protect paint booth walls and floors, trap dust and overspray, and brighten work areas. The material can also be used to help protect other surfaces such as table tops, paint scales, paint mixing room walls and floors, prep bay areas and more.This adhesive-backed, nonwoven material features a breakthrough innovation that actually traps dust, dirt and overspray, decreasing airborne particles in the paint booth or prep station and keeping them out of paint finishes..The white color brightens the room, allowing for better visibility for color matching and verifying coverage during the application of paint products.Its adhesive backing provides cling to vertical surfaces, eliminating the need to fasten it with tape or other attachment methods. The low tack adhesive is specially formulated to release when pulled by hand, allowing easy removal of material coated with paint overspray, dust or dirt.Directions for installing 3M™ Dirt Trap Nonwoven Protection Material on wallsInstall the first section closest to the floorAttach the dispenser to the adjacent wallPull the fabric out the length of the boothUse the squeegee to attach the far end of the material at the cornerWork your way back to the dispenser aligning the material and attach to the wallCut the material at the dispenserSqueegee the entire wall section to make sure it is attached completelyRe-mount the dispenser at the level of the second sectionOverlap the first section (1" or less)Use the same method to finish installing 3 wall sectionsAfter the third section is installed, cut out around the windows and lightImportant - Material should be replaced prior to 150 bake cycles for clean and easy removalDirections for installing 3M™ Dirt Trap Nonwoven Protection Material on floorsAttach the dispenser to the end wall for the floor installationPull out the material and align the first floor section close to the wallContinue installing sections as neededThe dispenser may also be placed on the floor for dispensingImportant - Avoid covering the floor grate (material may restrict air flow)

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Customers who bought this product also bought