Primers & Undercoats

3M™ Scotchrap™ Pipe Primer, 1 gallon can, 1 gallon/container, 4 gallons/Case

3M™ Scotchrap™ Pipe Prime is a quick drying, non sag rubber base primer that permeates metal surface pits and irregularities, preparing the surface for tape application. Compatible with the special adhesive on 3M Scotchrap Tapes, it enhances adhesion. To be used with 3M Scotchrap Corrosion Protection Tapes 50 and 51. 1 gallon can.

3M™ Scotchcast™ Electrical Resin Primer 5136N

3M™ Scotchcast™ Electrical Resin 5136N is a 1 part solvent based, electrical resin primer. This primer is formulated to improve adhesion of low surface energy substrates for 3M Scotchcast epoxy and polyurethane resins.

3M™ Scotchkote™ Liquid Phenolic Primer 345, excellent surface adhesion, 5 gallon Pail

3M™ Scotchkote™ Liquid Phenolic Primer 345 is a one-part phenolic base primer designed specifically for application to metal surfaces prior to topcoating with Scotchkote™ Fusion Bonded Epoxy Coating. When properly applied, the Scotchkote™ 345 primer and topcoat system provide excellent damage resistance to CO2, H2S, CH4, petroleum distillates and brine at elevated temperatures and pressures.

Mar-Hyde® Black Satin™ Automotive Trim Coating, 03811, Aerosol, 12 oz Net Wt, 12 per case

Mar-Hyde™ Black Satin Automotive Trim Coating delivers extremely durable coated protection to metal and plastic surfaces. This coating is ideal for exterior auto trim – it adheres to surfaces including aluminum, steel, stainless steel and plastic and resists weathering. Black aerosol coating applies smoothly and instantly adds a sharp look to vehicles.

Mar-Hyde™ 4.4 Ultimate® 2K High Speed Primer Catalyst, 05557, 1 qt, 6 per case

Mar Hyde™ 4.4 Ultimate 2K High Speed Primer Surfacer adds smoothness and efficiency to your collision repair paint jobs. It creates a high build film that fills in sand scratches and other impurities in most any vehicle substrate that forms a smooth surface for paint topcoats. It also dries very fast, reducing the cure time to 1 hr for faster shop throughput.

3M™ Rocker Schutz™ Coating, 08874, 1 quart, 6 per case

Our 3M™ Rocker Schutz™ Coating is a tough, chip-resistant coating developed specifically for restoring and protecting rocker panels and similar vehicle areas during collision repair. This coarse-textured coating can be easily thinned and tinted to match OEM textures. Spray-on coating is very easy to use: it is tack free in as little as five minutes and paintable in as little as 30 minutes.

3M™ Rubberized Undercoating, 08883, 19.7 oz (560 g) Net Wt, 6 per case

3M™ Rubberized Undercoating produces a textured finish which resists chipping, abrasion, exterior rusting and weathering. Provides one-coat build-up with no dripping, running or sagging.

3M™ No Cleanup Waterbased Undercoating, 08804, 18 fl oz, 6 per case

3M™ No Cleanup Waterbased Undercoating delivers what you need in a vehicle undercoat – including corrosion and abrasion resistance, high-build capabilities, sound deadening qualities and fast direct-to-metal spray application – without the time and expense of cleanup. This water-based formula sprays on consistently and is fully paintable for automotive undercarriages and more.

3M™ Rocker Panel Coating, 08889, Gray, 21 oz Net Wt, 6 per case

3M™ Rocker Panel Coating is a resilient coating designed to protect vehicle surfaces where they are vulnerable – on rocker panels, and other lower auto body panels and parts exposed to impact from gravel and stones. Formulated to match coarser OEM textures, this coating forms an extra layer over primer and under paint. The light gray coating is compatible with many common automotive paints.

3M™ No Cleanup High Coverage Body Schutz Coating, 08964, 22.4 fl oz, 6 per case

3M™ No Cleanup High Coverage Body Schutz Coating delivers the corrosion resistance, abrasion resistance and sound deadening capabilities of a premium rubberized undercoating without the costly cleanup. This tough undercoat is formulated for excellent high-coverage spray patterns when used with 3M™ No Cleanup application equipment. Undercoat is high build and dries in as little as 30 minutes.

3M™ Body Schutz™ Rubberized Coating Black, 08864, 1 quart, 6 per case

3M™ Body Schutz™ Rubberized Coating works as a protective coating with sound deadening qualities designed for cars, trucks and vans. Our black, rubberized coating bonds to a wide variety of surfaces and is best applied with our 3M™ Body Schutz™ Applicator Gun, part number 08997.

3M™ Rocker Protector Pouch, 08734, 5.5 fl oz, 4 per case

3M™ Rocker Protector Pouch is a resilient under-the-paint protective coating designed to help protect rocker panels and stone-throw areas of automobiles.The specially-engineered formula matches a wide variety of textures on factory-applied coatings. Use this pouch with 3M™ Accuspray™ Spray Gun Kit HGP (sold separately) to access hard-to-reach areas and ensure uniform application.