3M™ Weld-Thru Coating II, 05917, 12.75 oz Net Wt/361 g, 6 per case
3M™ Weld-Thru II is a convenient aerosol coating designed to prevent corrosion between welded metal surfaces. Featuring a zinc base that draws corrosion away from bare metals, it helps prevent costly comebacks due to corrosion at welds. Spray coating applies fast, resists weld spatter common to some weldable primers and dries in as little as 5 minutes, increasing shop efficiency and productivity.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000000638
-
3M ID60980107779
-
UPC00-51131-05917-7
-
Product Formal Name3M™ Weld-Thru Coating II, 05917, 12.75 oz Net Wt/361 g, 6 per case
-
Brand-old3M
-
Case UnitCase of 6
-
Unit of MeasureCanister
-
Estimated Lead Time2
-
Color-oldGray
-
Inventory Status CodeS
-
Data Sheethttp://multimedia.3m.com/mws/media/340316O
-
Technical Informationhttps://multimedia.3m.com/mws/media/340316J/3m-weld-thru-ii-coating-05917-tds.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4Yt158m1Ov70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
ApplicationsAnti-Corrosion
-
ConsistencyAerosol
-
Return PolicyNo Return
-
Box Length (in)8.6
-
Box Width (in)5.8
-
Box Height (in)8.5
- Bullets
-
Bullet 1- Protects bare metal panels and parts from corrosion after welding
- Zinc base draws away contact corrosion, leaving substrates strong
- Convenient aerosol spray application
- Dries in as little as 5 minutes before MIG welding for efficient throughput
- Formulated for minimum weld spatter, helping prevent shop damage
- Accepts 3M™ Cavity Wax Plus (PN 08852) and other 3M coatings on non-weld metal surfaces
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3208900000
-
UNSPSC Code12163600
-
United States Department Of Transportation Ground US DOT, 49 CFRLIMITED QUANTITY
-
United States Department Of Transportation Vessel US DOT, 49 CFRUN1950, AEROSOLS, 2.1, LIMITED QUANTITY
-
NMFC Item043940
-
NMFC Class085.0
-
NMFC Sub02
-
Transport Protective ServiceMAINTAIN TEMP BELOW 125F (52C)
-
International Air Transport AssociationUN1950, AEROSOLS, FLAMMABLE, 2.1
-
International Maritime OrganizationUN1950, AEROSOLS, 2.1, LIMITED QUANTITY
-
Flashpoint TransportNo Flash Point
-
-
SKU7000000638
-
UPC/ISBN00051131059177
Keeping Bonds StrongBy preventing corrosion between welded auto body panels, our 3M™ Weld-Thru II promotes stronger business between your shop and your customers. This coating protects against corrosion where untreated bare metal substrates are welded - its zinc base uses the concept of bimetallic corrosion to keep metal parts from degrading. Welds stay strong, parts and panels don't corrode and you keep comebacks to a minimum.Tough on Corrosion, Easy for Welding3M™ Weld-Thru II also helps keep collision repair shops operating efficiently. Its convenient aerosol can makes it fast and easy to apply, and features an actuator tip that resists plugging even after repeated use. The coating dries in as little as 15 minutes when using a resistance spot welder and as little as 5 minutes for MIG welding, helping technicians work faster and maximizing throughput. The formula also resists weld spatter than can cause burns to technicians or shop equipment.3M™ Weld-Thru II can also be easily used on non-weld metal surfaces with 3M™ Cavity Wax Plus 08852 and 3M™ Cavity Wax Applicator Wand Kit 08851.Applying Better Science to Collision RepairOur 3M™ Weld-Thru II coating is another example of 3M Science. Applied to Life™. It uses the science behind bimetallic, or contact, corrosion to draw rust and other corrosive effects away from untreated bare metal - keeping the bonds strong at the welds, and keeping the bonds strong between your customers and your collision repair business.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.