3M™ Tack Pad 07910, 175 mm x 235 mm, 10 per inner, 60 per case

The 3M™ Tack Pad has been developed especially for the automotive aftermarket to remove dirt, lint, dust and sanding particles prior to spraying primers, base coat or clear coat paints. Based on 3M’s non-woven technology, the pad’s tacky surface picks up dust and the three-dimensional web inside absorbs dust particles. Use it on metal, plastic, fiberglass or wood.

Price: $86.54

(Case of 60 Each)

Return Policy

Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.

Learn more

- Weight
  3.1 lbs
- SKU
  7100193601
Industry
IB
Lead Time
2
Manufacturer
3M
SAP
7100193601
Product Formal Name
3M™ Tack Pad 07910, 175 mm x 235 mm, 10 per inner, 60 per case
Case Unit
Case of 60
Unit of Measure
Each
Estimated Lead Time
2
Inventory Status Code
S
Country of Origin
Germany
Return Policy
No Return
Box Length (in)
15.75
Box Width (in)
10.43
Box Height (in)
7.87
Bullets
- Bullet 1
  - Tacky pad Thoroughly removes surface dust particles to provide a perfectly clean surface prior to paint or primer
  - Three-dimensional design draws dust into the pad for Total dust collection without leaving drag marks behind
  - Conformable pad gets into grooves and contours of the workpiece for complete coverage
  - specialized coating reduces adhesive transfer to hands or workpiece
  - unique design Assists in removing light nibs
Transportation
- ECCN Number
  EAR99

SKU
7100193601

Thoroughly Removes Dirt and Dust Without Leaving Drag MarksTo achieve a perfect paint job all loose dirt and dust particles must be removed without leaving surface marks. Our 3M™ Tack Pad absorbs dust into the pad as it glides across the surface without leaving any surface marks behind, reducing rework. The conformable pad reaches dust on all surfaces of the workpiece, whether flat, contoured or grooved. It is designed to work with all modern paint systems, including water-based paints, and can even help remove light nibs.Tacky Fibers Grab Dust From the Workpiece but Won't Leave Hands StickyA slightly tacky adhesive is distributed evenly throughout the product so you can use the pad again and again with the same efficient results. This adhesive is engineered to pick up dust without leaving behind any inconvenient adhesive residue on the workpiece or your hands. For even longer life, the adhesive will not dry out, so you get full use of the pad until the adhesive is exhausted.Optional Pad Dispenser Offers Clean, Ready Access A wall mountable 3M™ Tack Pad Dispenser (sold separately) keeps the pads free from contamination and makes them readily accessible.When thorough surface preparation is essential, finish off with a 3M™ Tack Pad for best results.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.