3M™ Flow Control Chemical Dispenser, Air Gap, 1/Case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7010385976
-
UPC00-51125-85852-1
-
Product Formal Name3M™ Flow Control Chemical Dispenser, Air Gap, 1/Case
-
Case UnitCase of 1
-
Unit of MeasureEach
-
Estimated Lead Time2
-
Inventory Status CodeN
-
Data Sheethttps://multimedia.3m.com/mws/media/1042741J/3m-flow-control-brochure.jpg
-
Technical Informationhttps://multimedia.3m.com/mws/media/146566J/3m-product-shelf-life-information.jpg
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)25.9
-
Box Width (in)16.4
-
Box Height (in)10.3
- Bullets
-
Bullet 1- 55% more accurate at diluting chemical concentrates, on average*
- 17% to 49% more compact** while holding up to four half-gallon concentrate bottles
- Helps minimize chemical waste***
- * The 3M™ Flow Control System (FCS) is on average 55% more accurate at diluting chemical concentrates than the nearest competitive system when tested under laboratory conditions at water pressures ranging from 20 to 120 psi.
- ** The 3M™ Flow Control System is 17% to 49% smaller in cabinet volume than the four competitive four-bottle dispenser systems tested.
- *** Compared with traditional bulk chemical dispensers.
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number8424899000
-
UNSPSC Code47000000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item178980
-
NMFC Class085.0
-
NMFC Sub02
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7010385976
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.