3M™ Easy Shine Replacement Supply Tubing With Quick Connect, 1/Case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000126810
-
3M ID70071279791
-
UPC00-48011-55437-2
-
Product Formal Name3M™ Easy Shine Replacement Supply Tubing With Quick Connect, 1/Case
-
Brand-old3M
-
Case UnitCase of 1
-
Unit of MeasureEach
-
Product ID55437
-
Estimated Lead Time2
-
Size Metric8 Inch x 20 Centimeter
-
Inventory Status CodeN
-
Data Sheethttp://multimedia.3m.com/mws/media/316894O
-
Technical Informationhttps://multimedia.3m.com/mws/media/146566J/3m-product-shelf-life-information.jpg
-
Country of OriginChina
-
ApplicationsHard Floors
-
Return PolicyNo Return
-
Box Length (in)11.4
-
Box Width (in)11.4
-
Box Height (in)4.8
- Bullets
-
Bullet 1- The connecting tube transfers floor finish/protector or cleaning chemicals from the 1.5 gallon bag to the bottom of the pole on the 3M™ Easy Shine Floor Finish Applicator Kit
- Clean by running warm water through tube.
- Replace as necessary.
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3917330000
-
UNSPSC Code47130000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item033240
-
NMFC Class250.0
-
NMFC Sub01
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.