3M™ Fire Barrier Restricting Collar, 2 inch 1/case

3M™ Fire Barrier RC-1 Restricting Collar works with our 3M™ Fire Barrier Wrap Strip FS-195+ or Ultra GS firestops for through penetrations in wall, floor and floor/ceiling assemblies. Durable 28-gauge steel collar is easily cut to fit the pipe diameter. The collar secures the firestop and provides tabs for anchoring to walls or floor slabs, helping ensure stability for effective firestops.

Price: $86.95

(Case of 1 Each)

Return Policy

Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.

Learn more

- Weight
  5.3 lbs
- SKU
  7100009600
- UPC/ISBN
  00054007083245
Industry
IB
Lead Time
2
Manufacturer
3M
SAP
7100009600
3M ID
80008006563
UPC
00-54007-08324-5
Product Formal Name
3M™ Fire Barrier Restricting Collar, 2 inch 1/case
Brand-old
3M
Case Unit
Case of 1
Unit of Measure
Each
Estimated Lead Time
2
Size
2 in x 25 Linear ft
Size Metric
25 Linear Foot x 7.6 m
Color
Silver
Color-old
Silver
Inventory Status Code
S
Technical Information
https://multimedia.3m.com/mws/media/201511J/3m-fire-barrier-rc-1-restricting-collar.jpg
Country of Origin
USA
Return Policy
No Return
Width
2 in
Length
25 Linear ft
Box Length (in)
6.7
Box Width (in)
6.7
Box Height (in)
6.5
Bullets
- Bullet 1
  - Helps ensure secure installation of expandable firestop and proper closure during fire
  - Durable 28-gauge steel protects firestop material
  - Convenient roll is easily cut to size
  - Bendable tabs let installers anchor penetrations to slabs quickly and permanently
  - Use in conjunction with 3M™ Fire Barrier Wrap Strip FS-195+ or Ultra GS
Transportation
- ECCN Number
  EAR99
- Harmonized Tariff Schedule Number
  7326908688
- UNSPSC Code
  46191604
- United States Department Of Transportation Ground US DOT, 49 CFR
  NOT REGULATED
- United States Department Of Transportation Vessel US DOT, 49 CFR
  NOT REGULATED
- NMFC Item
  175120
- NMFC Class
  060.0
- NMFC Sub
  11
- Transport Protective Service
  PROTECTIVE SERVICE NOT REQUIRED
- International Air Transport Association
  NOT REGULATED
- International Maritime Organization
  NOT REGULATED
- Flashpoint Transport
  No Flash Point

SKU
7100009600
UPC/ISBN
00054007083245

A Small but Vital Part of an Effective Firestop SystemWith its small but critical design features, our 3M™ Fire Barrier RC-1 Restricting Collar is integral to successful intumescent firestop installation around penetrations in wall, floor and floor/ceiling assemblies. Quite simply, it’s a crucial component for ensuring that elastomeric and hard char firestop material will properly close openings left by burned non-metallic pipes and other penetrations. In fact, the use of such a collar is required for firestopping plastic pipes larger than 4” (101.6 mm) in diameter. The Fire Barrier RC-1 is ideal for use in conjunction with 3M™ Fire Barrier Wrap Strip FS-195+ or 3M™ Fire Barrier Ultra GS firestops.Recommended ApplicationsUL-classified for use on PVC, CPVC, ABS, CCPVC, CCABS, PVDF, PP and PB plastic pipeIn conjunction with 3M™ Fire Barrier Wrap Strip FS-195+In conjunction with 3M™ Fire Barrier Ultra GSThe Basis for Durable FirestopsDurable 28-gauge steel is thin enough for installers to easily unroll and cut to size around the installed firestop. It is quickly secured into place with a hose clamp or steel tie wire. Notches in its outer edge of the RC-1 Restricting Collar form bendable tabs – installers simply bend them into place and use hardware such as masonry fasteners (sold separately) to anchor them to the floor or ceiling slab. The result is a permanent, fixed firestop that also contributes to the structural stability of the penetration.The Science of Better Fire Protection from 3MSince 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our adhesives, sealants, protective coatings, along with the best ways to use them – including 3M™ Fire Barrier RC-1 Restricting Collar – to improve performance, and to help businesses like yours operate faster, better and more efficiently.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M Fire Barrier Blocks, Plugs and Planks