3M™ Fire Barrier Mortar, Gray, 44 lb Bag
3M™ Fire Barrier Mortar is a lightweight, gypsum-based powder that mixes with water to form a heat-absorbing firestop for through penetrations in fire-rated floor or wall assemblies. Versatile mortar can be mixed self-leveling or non-sag, and adheres to a range of construction substrates and penetrants. It also acts as a heat sink, reducing the chance of fire on unexposed sides of the assembly.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000031967
-
3M ID98040056073
-
UPC00-51115-54900-7
-
Product Formal Name3M™ Fire Barrier Mortar, Gray, 44 lb Bag
-
Brand-old3M
-
Case Unit1 Case of 1
-
Unit of MeasureBag
-
Estimated Lead Time2
-
Volume44 lb
-
ColorOff-White with Dark Flecks
-
Color-oldOff-White with Dark Flecks
-
Inventory Status CodeS
-
Technical Informationhttps://multimedia.3m.com/mws/media/201506J/3m-fire-barrier-mortar-technical-data-sheet.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMYtU4x2UNv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginSpain
-
Return PolicyNo Return
-
Box Length (in)23.8
-
Box Width (in)14.9
-
Box Height (in)3.9
- Bullets
-
Bullet 1- Ready-to-mix pumpable mortar is deal for firestopping large annular spaces and floors
- Lightweight mortar designed to absorb heat, reducing chance of combustion on unexposed sides
- Polypropylene-fiber reinforced powder mixes with water for self-leveling or non-sag applications
- Contains no asbestos, MMMF or halogens
- Firestop tested for up to 3 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC-S115
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3816002050
-
UNSPSC Code30000000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item050155
-
NMFC Class050.0
-
NMFC Sub04
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000031967
-
UPC/ISBN00051115549007
A Firestop that Can Take the HeatFor mechanical and electrical through penetrations where the penetrants may generate heat, our 3M™ Fire Barrier Mortar provides a ready-to-mix solution. This gypsum-based mortar acts as a heat sink, absorbing heat from penetrants and reducing the chances of combustion inside firestopped floor and wall assemblies.Recommended ApplicationsFirestopping and sealing mechanical and electrical service penetrationsBlank openings and large annular spacesFloors and other applications requiring self-leveling materialVertical and horizontal substrates requiring non-sag adhesionFully Tested and Approved3M™ Fire Barrier Mortar is firestop tested up to 3 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC-S115 when installed in listed systems, including 2-1/2" (63.5 cm) minimum thickness concrete floors. It is also tested in accordance with AS1530.4, EN1366 and ASTM E814 (UL Listed) and has proven self-bonding during fire testing.Easy and Safe to UseThe firestop mortar comes ready to mix with potable water, making it fast and cost-effective. Versatile material can be mixed to a thinner consistency for self-leveling applications such as floors, or as a non-sag material for vertical walls. It adheres well to range of common construction materials including concrete, metals, wood, plastic and cable jacketing. The mortar is pumpable as well, resulting in faster work times and lower labor costs. It cleans easily with water. Polypropylene-fiber reinforced material reduces cracking during cure time. The cured material is paintable after priming. It is also re-enterable, allowing technicians to easily access components after installation with a common hole saw.This mortar contains no asbestos, halogens, Portland cement or MMMF and requires no fibrous damming materials or procedures.The Science of Better Fire Protection from 3MSince 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life -developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our adhesives, sealants, protective coatings and firestop materials like 3M™ Fire Barrier Mortar - to improve performance, and to help businesses like yours operate faster, better and more efficiently.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.