• 0
3M™ Fire Barrier Moldable Putty Stix MP+, Red, 1.4 in x 11 in, 10/case

3M™ Fire Barrier Moldable Putty Stix MP+, Red, 1.4 in x 11 in, 10/case

3M™ Fire Barrier Moldable Putty Stix MP+ is a one-part, re-enterable, intumescent putty that can be easily formed to firestop through penetrations and blank openings in fire-rated assemblies. We formulated this dark red, easily moldable putty stick to provide up to 4 hours of fire protection. These putty stix also produce a draft and cold smoke seal and help reduce noise transfer.

Price: $186.10

(Case of 10 Each)

  • $186.10
    • Case of 10 - $186.10
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    Learn more
    • Weight
      10.6 lbs
    • SKU
      7000006381
    • UPC/ISBN
      00051115165269
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000006381
  • 3M ID
    98040054177
  • UPC
    00-51115-16526-9
  • Product Formal Name
    3M™ Fire Barrier Moldable Putty Stix MP+, Red, 1.4 in x 11 in, 10/case
  • Brand-old
    3M
  • Case Unit
    Case of 10
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Size
    1.4 in x 11 in
  • Size Metric
    11 Inch x 279 mm
  • Color
    Red
  • Color-old
    Red
  • Inventory Status Code
    S
  • Data Sheet
    http://multimedia.3m.com/mws/media/751181O
  • Technical Information
    https://multimedia.3m.com/mws/media/1124160O/3m-fire-barrier-moldable-putty-eta.pdf&fn=MP+ ETA 09-0351 ENG UK.pdf
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x482SO8tUov70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    1.4 in
  • Length
    11 in
  • Box Length (in)
    13.1
  • Box Width (in)
    8.2
  • Box Height (in)
    3.8
  • Bullets
    • Bullet 1
      - Firestop tested up to 4 hours in accordance with ASTM E 814 (UL 1479) & CAN/ULC S115
      - Putty provides draft and cold smoke seal
      - Pliable and conformable design easily molds into required shapes
      - Helps reduce noise transfer (STC-Rating of 56 when tested in STC 56-rated wall assembly)
      - Will not dry out or crumble for a re-enterable and repairable solution
      - Excellent adhesion and aging properties provide a long-term performance
      - Noncorrosive to metal and compatible with synthetic cable jackets
      - Low VOC, halogen-free and solvent-free formula for safe working environment with minimal odor
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      3214100020
    • UNSPSC Code
      46191604
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
    • NMFC Item
      050155
    • NMFC Class
      050.0
    • NMFC Sub
      04
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT RESTRICTED, AS PER SPECIAL PROVISION A197, ENVIRONMENTALLY HAZARDOUS SUBSTANCE EXCEPTION
    • International Maritime Organization
      NOT RESTRICTED, AS PER IMDG CODE 2.10.2.7, MARINE POLLUTANT EXCEPTION
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000006381
  • UPC/ISBN
    00051115165269

Moldable FirestopConformable and ready-to-use, our 3M™ Fire Barrier Moldable Putty Stix MP+ is a one-part, intumescent firestop containing a synthetic elastomer. The intumescent property of this material allows 3M™ Fire Barrier Moldable Putty Stix MP+ to expand and help maintain a firestop penetration seal for up to 4 hours. We designed this putty to be easily moldable by hand, conforming into required shapes. This firestop also exhibits excellent adhesion to a full range of construction substrates and penetrants. In addition, 3M™ Fire Barrier Moldable Putty Stix MP+ helps minimize sound transmission through assemblies requiring an STC rating and acts as a draft and cold smoke seal for systems with L-Ratings. This firestop putty has excellent aging properties, will not dry out or crumble and is a re-enterable and repairable solution.Recommended Applications3M™ Fire Barrier Moldable Putty Stix MP+ are typically used to seal gaps between cables in multiple penetrations and is suited for numerous firestop applications including:Cable (including fiber inner duct and cable)Insulated pipeElectrical ConduitMetal PipePenetration against air draft, smoke, noxious gas and flame propagationMeets Firestop Requirements3M™ Fire Barrier Moldable Putty Stix MP+ features low VOC and its halogen- and solvent-free formula is non-corrosive and safe for sensitive electrical equipment. This product is compatible with synthetic cable jackets.3M™ Fire Barrier Moldable Putty Stix MP+ firestops penetrations passing through fire-rated floor, floor/ceiling or wall assemblies and blank openings. When used in a through penetration firestop application, this firestop putty intumesces in the annular space to completely surround the penetrant, helping prevent the spread of fire, smoke and toxic gas before, during and after exposure to a fire.3M™ Fire Barrier Moldable Putty+ meets ASTM E 814 (UL 1479) requirements and STC-Rating of 52 when tested in a STC 53-Rated wall assembly. This product also meets the requirements of key life safety codes, including the International Building Code (IBC), NFPA 5000, NEC (NFPA 70), NFPA 101 and NBC (Canada) Building Codes. In addition, this firestop meets the intent of LEED® VOC guidelines.Fire Protection Formed to SpecificationsThis intumescent firestop putty is easily formed to firestop through penetrations and blank openings in fire-rated assemblies, providing a shield that helps prevent the spread of fire, smoke and toxic gas. For a conformable yet tough firestop, enjoy the excellent, protective features of our 3M™ Fire Barrier Moldable Putty Stix MP+.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M Fire Barrier Blocks, Plugs and Planks