3M™ Fire Barrier Composite Sheet CS-195+, 36 in x 36 in, 1/case

3M™ Fire Barrier Composite Sheet CS-195+ is a lightweight intumescent firestop that combines four components into a single system to help slow the spread of fire, smoke and noxious gases. Sheets combine 28-gauge steel, intumescent material, wire mesh and aluminum foil and are easy to handle and install with common trade tools. They are firestop tested for up to 4 hours of fire protection.
Price: $387.80

(Case of 1 Each)

  • $387.80
  • Case of 1 - $387.80
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      30.2 lbs
    • SKU
      7100011415
    • UPC/ISBN
      00051115072222
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100011415
  • 3M ID
    98040024089
  • UPC
    00-51115-07222-2
  • Product Formal Name
    3M™ Fire Barrier Composite Sheet CS-195+, 36 in x 36 in, 1/case
  • Brand-old
    3M
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Product ID
    CS-195+
  • Part Number
    CS195+3636
  • Estimated Lead Time
    2
  • Size
    36 in x 36 in
  • Size Metric
    36 Inch x 914 mm
  • Color
    Silver
  • Color-old
    Silver
  • Inventory Status Code
    S
  • Data Sheet
    http://multimedia.3m.com/mws/media/201505O
  • Technical Information
    https://multimedia.3m.com/mws/media/1124166O/3m-fire-barrier-composite-sheet-cs-195-eta.pdf&fn=ETA 12-0559 3M CS-195+.pdf
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    36 in
  • Length
    36 in
  • Box Length (in)
    41.1
  • Box Width (in)
    36.4
  • Box Height (in)
    1
  • Bullets
    • Bullet 1
      - Four-component intumescent system is ideal for firestopping larger penetrations such as cable trays and conduit
      - Forms effective intermittent fire-break within horizontal and vertical cable tray runs
      - Hard char material tightly seals penetrations against flame spread, smoke and toxic gases
      - Easy to install: cut, form and install using common trade tools for nearly any size
      - Thermally conductive: allows unwanted heat build-up to escape, helping reduce derating issues
      - Re-enterable for new or retrofit installations
      - Firestop tested for up to 4 hours in accordance with ASTM E 814 (UL 1479)
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      4008210000
    • UNSPSC Code
      46191604
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      103300
    • NMFC Class
      060.0
    • NMFC Sub
      11
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100011415
  • UPC/ISBN
    00051115072222

Firestopping in Nearly Any Size and ShapeFor larger openings and penetrations where putties and strips alone aren't enough, our 3M™ Fire Barrier Composite Sheet CS-195+ is a one-part firestop system that installers can cut and form to exact sizes - no mixing or damming required. These sheets are easily installed using common tools and fasteners. Ideal for firestopping penetrations such as cable trays and conduit, the sheets feature intumescent material bonded to 28-gauge galvanized steel, reinforced on its facing side with hexagonal wire mesh and covered in aluminum foil. This combination of organic/inorganic materials makes these composite sheets a reliable firestop in tested and listed systems, new and retrofit. These materials also make an excellent thermal conductor, helping to dispel built-up radiant heat to preserve process and control equipment and help minimize cable derating concerns.Recommended ApplicationsSeal penetrations through fire-rated walls and floorsFirestop penetrations including cable trays, cable, piping and large blanksMultiple component installations where heat build-up and derating are concernsShield conduit, HVAC ductwork, panels, valves and vital heat-sensitive process equipmentFire-resistive and smoke seal for any shape opening in concrete block or slabsProtect cable drop-outs, junction boxes and cabinetsIntermittent firestop in horizontal and vertical cable tray runsIn conjunction with 3M™ Fire Barrier Sealant or Moldable Putty MP+Fully Tested and Approved3M™ Fire Barrier Composite Sheet CS-195+ is firestop tested up to 4 hours in accordance with ASTM E 814 (UL 1479).The Science of Better Fire Protection from 3MSince 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life -developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our adhesives, sealants, protective coatings, devices and firestop products including 3M™ Fire Barrier Composite Sheet CS-195+ to improve performance, and to help businesses like yours operate faster, better and more efficiently.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.