3M™ Polisher 28363, 75 mm Diameter M17-1.5 Internal, 1 per case

The revolutionary 3M™ Perfect-It™ Denibbing System uses pinpoint microsanding for fast, convenient paint finishing repairs that consistently match OEM finishes. Technicians can reduce repair areas to the size of a quarter, versus sanding and polishing entire painted panels. The system includes a handheld cordless mini-sander and polisher, abrasive stems, liquid polishes, pads and cloths.
Price: $378.09

(Case of 1 Each)

  • $378.09
  • Case of 1 - $378.09
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      2.353 lbs
    • SKU
      7000045263
    • UPC/ISBN
      00051141283630
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000045263
  • 3M ID
    60440236655
  • UPC
    00-51141-28363-0
  • Product Formal Name
    3M™ Polisher 28363, 75 mm Diameter M17-1.5 Internal, 1 per case
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Country of Origin
    Italy
  • Return Policy
    No Return
  • Box Length (in)
    11.9
  • Box Width (in)
    6.9
  • Box Height (in)
    3.4
  • Bullets
    • Bullet 1
      - Complete system for small area repair: consistent, pinpoint sanding of dirt nibs saves time and money
      - Allows technicians to remove nibs without sanding most or all of a freshly-painted panel
      - Includes cordless handheld mini-sander and micro-polisher to reduce sanding and polishing steps
      - Trizact™ abrasive stems snap in and out to minimize flat spots and improve finishes
      - Includes all polishes, cloths and pads for easy, seamless use
      - No water mess and minimal compound residue saves cleanup time
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8467111040
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      186620
    • NMFC Class
      085.0
    • NMFC Sub
      08
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000045263
  • UPC/ISBN
    00051141283630

Using Microsanding, Small Area Repair for Big ResultsOur 3M™ Perfect-It™ Denibbing System is a revolutionary way to remove dirt defects in auto body paint surfaces. With its lightweight, cordless, handheld 3M™ Perfect-It™ Denibbing Tool and abrasive stems, the system uses micro-sanding to eliminate the time and expense of sanding and polishing entire freshly-painted panels even for small repairs. Instead, you precisely remove individual dirt nibs and re-polish the surface. Each repair area is no larger than a U.S. quarter. This small area repair technique also significantly reduces water mess and compound slush, saving cleanup time.With a built-in battery life indicator, the mini-sander fully recharges in its docking base (also included) within 30 minutes.Abrasive Stems Minimize Flat SpotsOur Trizact™ abrasive stems in 1000 and 1500 grits snap quickly into the mini-sander for removing nibs and refining sand scratches. The system allows technicians to sand away dirt nibs without sanding the clear coat texture flat - making it fast and easy to create smooth, high gloss finishes that match OEM.Micro-Polishing in a Single StepThe 3M™ Perfect-It™ Denibbing System also includes a handheld dual-action, air-powered polisher, along with Perfect-it™ Denibbing Polish and 3M Perfect-it™ Ultrafine Machine Polish. You can bring denibbed vehicle surfaces to a high polish with 1-step buffing on most paint systems. Together with the included Ultrafine Foam Polishing Pad, this system ensures virtually no sling, no sticking and no smearing.About Our Trizact™ AbrasivesThe cordless Perfect-it™ Denibbing Tool uses Trizact™ abrasive stems for consistent, pinpoint sanding of dirt nibs and very small repair areas. Unlike conventional abrasives, 3M™ Trizact™ products start sharp and stay sharp, resulting in more predictable finishes and improved, consistent quality. Trizact™ products last longer than conventional abrasives and provide precise finish control such that operators can reduce grade sequences, requiring fewer process steps and fewer abrasive products. Three-dimensional structures uniformly distributed over the entire abrasive surface enable consistent performance without product-to-product variation.The Science of Better Paint Finishing from 3MWith its cordless micro-sanding and micro-polishing tools, advanced abrasives, pads, cloths and liquid polishes, our Perfect-It™ Denibbing System brings small area repair to your auto body operation. It's another way that 3M uses solid science to change the way collision repair technicians prepare painted surfaces, and to revolutionize paint shop productivity.System Includes:3M™ Perfect-It™ Denibbing Tool3M™ Perfect-It™ Denibbing Tool Charger3M™ Perfect-It™ Denibbing Abrasive (1000 Grade)3M™ Perfect-It™ Denibbing Abrasive (1500 Grade)3M™ Perfect-It™ Denibbing Polish3M™ Perfect-It™ Detailing Cloth3M™ Perfect-It™ Ultrafine Foam Polishing Pad3M™ Perfect-It™ Ultrafine Machine Polish

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Customers who viewed this product bought