3M™ NVH Dampening Material, 04274, 200 mL Cartridge, 6 per case

3M™ NVH Dampening Material is a flexible urethane adhesive-type material for replacing and re-installing factory NVH sealants and foams. This two-part material can be used to coat existing foams before reinstallation of outer body panels, or to fill thin gaps where foam cannot be used. Great for overhead or vertical surfaces, it cures to a flexible yet firm state and affords a 60-minute worktime.
Price: $311.53

(Case of 6 Each)

  • $311.53
  • Case of 6 - $311.53
Qty:  
In stock (45 items available)
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      5.1 lbs
    • SKU
      7100004038
    • UPC/ISBN
      00051131042742
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100004038
  • 3M ID
    62327538302
  • UPC
    00-51131-04274-2
  • Product Formal Name
    3M™ NVH Dampening Material, 04274, 200 mL Cartridge, 6 per case
  • Brand-old
    3M
  • Case Unit
    Case of 6
  • Unit of Measure
    Each
  • Part Number
    4274
  • Estimated Lead Time
    2
  • Color
    Black/Clear
  • Color-old
    Black/Clear
  • Inventory Status Code
    S
  • Technical Information
    https://multimedia.3m.com/mws/media/761550J/3m-nvh-dampening-material-04274-technical-data-sheet.jpg
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMx2vNxmxnv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Adhesive Type
    Two-Part Urethane
  • Consistency
    Paste
  • Return Policy
    No Return
  • Box Length (in)
    11.9
  • Box Width (in)
    9.5
  • Box Height (in)
    5.3
  • Bullets
    • Bullet 1
      - Soft, sturdy, non-shrink formula stops vibration and reduces noise between panels, braces and intrusion beams
      - Provides 60-minute worktimes to help ensure accurate installation
      - Excellent for thin gaps where foam cannot be used or easily replaced
      - Can be applied up to 1” thick to vertical and overhead surfaces with minimal drip
      - Non-solvent formula won’t shrink after installation
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      3506105000
    • UNSPSC Code
      25000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      LIMITED QUANTITY
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      UN1760, CORROSIVE LIQUID, N.O.S., (ISOCYANIC ACID, 3-(TRIETHOXYSILYL)PROPYL ESTER), 8, III, LIMITED QUANTITY
    • NMFC Item
      156240
    • NMFC Class
      060.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      UN1760, CORROSIVE LIQUID, N.O.S., (ISOCYANIC ACID, 3-(TRIETHOXYSILYL)PROPYL ESTER), 8, III
    • International Maritime Organization
      UN1760, CORROSIVE LIQUID, N.O.S., (ISOCYANIC ACID, 3-(TRIETHOXYSILYL)PROPYL ESTER), 8, III, LIMITED QUANTITY
    • Flashpoint Transport
      >290°F/143°C
  • SKU
    7100004038
  • UPC/ISBN
    00051131042742

Reduces Noise, Vibration and Harshness in VehiclesFor collision repair jobs where minimizing NVH (noise, vibration and harshness) is important, our 3M™ NVH Dampening Material is an excellent complement to flexible or pillar foams and factory dampening materials. This two-component material applies smoothly and easily between roof skins and roof bows, door skins, door intrusion beams or other areas using non-structural type foam materials. Unlike many seam sealers, this material goes in soft yet remains very sturdy, allowing for expansion and contraction of automotive sheet metal. Yet it has no solvents so it won't shrink and pull the metal in after installation. It minimizes application time and cleanup - it applies right from the cartridge without added mixing time, and provides up to a 1" thick layer of flexible material on vertical and overhead surfaces.3M™ NVH Dampening Material is especially useful for thin openings such as truck door skins, where installing new foam can become time-consuming - simply coat the existing integrally bonded foam instead of replacing it. Or, install dampening material by itself where foam cannot be used.The Science of Better Collision Repair from 3M3M has long been developing new ways to apply science to the lives of professionals in a range of industries including collision repair. Our 3M™ NVH Dampening Material is a great example - decades of knowledge in a product that delivers better results in time and quality even for the most specific jobs. Very simply, it's the right product at the right time for applying foams and other NVH products. So you can get the most value and customer satisfaction from your entire operation.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.