3M™ Dent Finishing Glaze, 05857, 276 mL DMS Cartridge, 6 per case

Our 3M™ Dent Finishing Glaze is a 2-part polyester glaze with excellent flowability, ideal for filling minor imperfections in sheet metal and as a €œskin coat" over body fillers. This self-leveling formula creates a smooth €œskin" coating over pinholes, sand scratches and low areas. Dent finishing glaze is part of our 3M™ Dynamic Mixing System.
Price: $298.10

(Case of 6 Each)

  • $298.10
  • Case of 6 - $298.10
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      7.4 lbs
    • SKU
      7000120077
    • UPC/ISBN
      00051131058576
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000120077
  • 3M ID
    60455065635
  • UPC
    00-51131-05857-6
  • Product Formal Name
    3M™ Dent Finishing Glaze, 05857, 276 mL DMS Cartridge, 6 per case
  • Brand-old
    3M
  • Catalog Product Category
    Body Filler, Glaze and Related
  • Case Unit
    Case of 6
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Data Sheet
    http://multimedia.3m.com/mws/media/738352O
  • Technical Information
    https://multimedia.3m.com/mws/media/738352J/tds-05857-3m-dent-finishing-glaze-rev-2.jpg
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xmxtv582BPv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Consistency
    Thick liquid
  • Return Policy
    No Return
  • Box Length (in)
    11.7
  • Box Width (in)
    9.8
  • Box Height (in)
    8
  • Bullets
    • Bullet 1
      - Two-part glaze applies from a single cartridge, eliminating mixing
      - Excellent flowability – fills pinholes, sand scratches and other minor imperfections
      - Self-leveling formula evens up low areas and reduces application time
      - Part of the 3M™ Dynamic Mixing System for savings in time and material costs
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      3214100090
    • UNSPSC Code
      25000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      LIMITED QUANTITY
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      UN3269, POLYESTER RESIN KIT, 3, III, LIMITED QUANTITY, +031C
    • NMFC Item
      050075
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      FORBIDDEN 3M PACKAGING DOES NOT MEET REGULATORY AGENCY REQUIREMENTS
    • International Maritime Organization
      UN3269, POLYESTER RESIN KIT, 3, III, LIMITED QUANTITY, +031C
    • Flashpoint Transport
      88°F/31°C
  • SKU
    7000120077
  • UPC/ISBN
    00051131058576

A Thin, Smooth Coating for Minor ImperfectionsWith a polyester base and a flowable, self-leveling formula, our 3M™ Dent Finishing Glaze for DMS combines strength, smoothness and versatility for specific finishing jobs in collision repair. Ideal for horizontal surfaces, this coating is designed to form a "skin" coat over sheet metal and body fillers to fill pinholes, sand scratches, low areas and other minor imperfections. It is suitable for use with nearly any automotive surface including steel, aluminum, SMC, fiberglass and cured automotive paint. This two-component glaze applies quickly and smoothly from a single cartridge, eliminating the time and guesswork needed for mixing and greatly reducing cleanup.Part of Our 3M™Dynamic Mixing System3M™ Dent Finishing Glaze is part of our 3M™Dynamic Mixing System of adhesives, sealers, fillers, compounds and related tools and accessories. This comprehensive solution is designed for maximum savings in shop time and materials.Using our 3M™Dynamic Mixing System is as easy as 1) Twist, 2) Mix and 3) Fix. Here is how it works: Twist a cartridge into place on the applicator until it locks into place. Mix the 2-part component product automatically by simply pulling the trigger on the applicator. Add a mixing nozzle and watch as it precisely mixes and dispenses a perfect ratio of product, eliminating guesswork. Fix, bond or seal instantly by applying the product directly from the applicator to the surface and spread into place.Advanced Technology Streamlines the Auto Body Repair Process3M uses science and technology to help automotive body technicians work smarter with less effort. With the Dynamic Mixing System, you dispense fillers, glazes, adhesives, sealers and plastic repair products when and where you want them, at the touch of a trigger.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M DMS Dynamic Mixing System Set Up

Customers who viewed this product bought