3M™ Dry Guide Coat Kit, 05861, 1.75 oz (50 g), 6 packs per case

3M™ Dry Guide Coat is used to identify surface imperfections such as pinholes in body filler and deep scratches in primer. Unlike liquid and aerosol guide coats, Dry Guide Coat requires no masking before use, and there is no dry time after application. The dry formula contains no intentionally added solvents and doesn't clog sandpaper while delivering easier cleanup.

Price: $338.12

(Case of 6 Kit)

  • $338.12
  • Case of 6 - $338.12
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      5 lbs
    • SKU
      7000000597
    • UPC/ISBN
      00051131058613
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000000597
  • 3M ID
    60980026409
  • UPC
    00-51131-05861-3
  • Product Formal Name
    3M™ Dry Guide Coat Kit, 05861, 1.75 oz (50 g), 6 packs per case
  • Brand-old
    3M
  • Catalog Product Category
    Body Filler, Glaze and Related
  • Case Unit
    Case of 6
  • Unit of Measure
    Kit
  • Estimated Lead Time
    2
  • Color
    Dark Gray
  • Color-old
    Dark Gray
  • Inventory Status Code
    S
  • Country of Origin
    United Kingdom
  • Return Policy
    No Return
  • Box Length (in)
    14.17
  • Box Width (in)
    9.53
  • Box Height (in)
    7.17
  • Bullets
    • Bullet 1
      - dry guide coat reveals surface imperfections such as pinholes and scratches
      - dry consistency requires No masking and requires No drying time
      - Product May be used in both wet or dry sanding
      - Contains No intentionally added solvents
      - Powder is Ideal to highlight body lines
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      3824999397
    • UNSPSC Code
      31211708
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      043940
    • NMFC Class
      085.0
    • NMFC Sub
      02
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000000597
  • UPC/ISBN
    00051131058613

Reveal Imperfections that Escape the Unaided Eye3M™ Dry Guide Coatis used in the dry primer sanding process to identify surface imperfections such as pinholes and deep scratches in primer. When sanding polyester filler, it ensures the filler is flat with no ripples and that the body styling lines and contours are straight and correct. It also ensures the total primed area is sanded prior to top coating.Check Now Before Discovering Problems LaterUsing this product prior to priming and sanding will save you rework later when surface imperfections would otherwise appear. You get superior visualization so you can correct problems early before they become bigger problems later. Once blemishes become evident after priming or painting, you have a choice to compromise the quality of the job or do costly rework.3M™ Dry Guide Coat saves you from that tough decision.Versatility of Dry Guide CoatOur dry guide coat is a carbon black powder that can be used on automotive and marine fillers, primers, paints and gelcoats. It may be used for either wet or dry sanding. The powder contains no intentionally added solventsthat can cause painting problems.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Customers who viewed this product bought