3M™ Scotch-Weld™ Epoxy Adhesive 2214 Hi-Temp New Formula, Gray, 6 fl oz Cartridge, 6/case
3M™ Scotch-Weld™ Epoxy Adhesive 2214 Hi-Temp New Formula is designed to provide high strength, high temperature resistance and smooth bond lines. This aluminum filled product is designed for use where higher strengths are required between 180ºF to 350ºF (-82ºC to 177ºC), especially on aluminum.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time10
-
Manufacturer3M
-
SAP7000046474
-
3M ID62349128306
-
UPC00-21200-20833-1
-
Product Formal Name3M™ Scotch-Weld™ Epoxy Adhesive 2214 Hi-Temp New Formula, Gray, 6 fl oz Cartridge, 6/case
-
Brand-oldScotch-Weld
-
BrandScotch-Weld
-
Case UnitCase of 6
-
Unit of MeasureEach
-
Product ID2214
-
Estimated Lead Time10
-
Volume6 oz
-
ColorGray
-
Color-oldGray
-
Inventory Status CodeN
-
PositionBest
-
Data Sheethttp://multimedia.3m.com/mws/media/66743O
-
Technical Informationhttps://multimedia.3m.com/mws/media/1901645J/3m-scotch-weld-epoxy-adhesive-ec-2214.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4xtvOYtvMv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormCartridge
-
IndustriesConstruction
-
Adhesive TypeEpoxy
-
Return PolicyNo Return
-
Box Length (in)8.8
-
Box Width (in)6.2
-
Box Height (in)4.3
- Bullets
-
Bullet 1- One part, 100% solids, heat curing adhesive
- Pliable paste consistency goes where needed with no sagging
- Lower exotherm than 3M™ Scotch-Weld™ Epoxy Adhesive 2214 Hi-Temp, but may flow more during cure
- Maintains excellent structural strength at temperatures up to 350ºF (177ºC)
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506915000
-
UNSPSC Code31200000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
-
United States Department Of Transportation Vessel US DOT, 49 CFRFORBIDDEN 3M US DIVISION POLICY
-
NMFC Item004620
-
NMFC Class060.0
-
NMFC Sub02
-
Transport Protective ServiceREFRIGERATE-SURFACE(DRYICE-AIR)
-
International Air Transport AssociationUN1845, CARBON DIOXIDE, SOLID, 9
-
International Maritime OrganizationFORBIDDEN 3M US DIVISION POLICY
-
Flashpoint TransportNo Flash Point
-
-
SKU7000046474
-
UPC/ISBN00021200208331
Pliable Paste Consistency Goes Where Needed with No Sagging Our 3M™ Scotch-Weld™ Epoxy Adhesive 2214 Hi-Temp New Formula is designed for use in applications where high strength bonds are needed in a temperature range of -180F to 350F (-82C to 177C). This epoxy adhesive may be applied by spatula, trowel, or flow equipment to meet your individual project requirements.Recommended ApplicationsHigh temperature aluminum bondingUnderstanding One-Part Epoxy AdhesivesEpoxy adhesives are part of the class of adhesives called structural adhesives, which include polyurethane, acrylic, cyanoacrylate and other adhesive families. While most epoxies are two-part formulations that undergo a chemical reaction when mixed, there are also one-part epoxy adhesives in which the chemical reaction begins when they are subjected to high temperatures for specified periods. These one-part formulations do not require measuring or mixing and can generally be reworked until heat is applied. They also exhibit higher temperature resistance than two-part epoxy adhesives.Epoxy adhesive (often referred to as epoxy glue) is widely used in building and home construction; aircraft and automobile manufacturing; bicycle, boat, golf clubs, ski and snowboard assembly as well as a host of home use and other applications. It is used virtually anywhere high-strength bonds are needed along with resistance to environmental conditions. These adhesives are popular for their ease of use, mechanical strength and chemical resistance. Formulations can be created to make epoxy for plastic flexible or epoxy for metal rigid, epoxy resin transparent or opaque, quick setting or slow setting. The versatility with which these adhesives can be formulated helps meet almost any requirement for bonding wood, metal, glass, stone and various plastics.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.