3M™ Self-Leveling Seam Sealer, 08307, 200 mL Cartridge, 6 per case

3M™ Self-Leveling Seam Sealer is a two-part epoxy designed for roof ditches (door skin hem flanges) and rear body panels, including tail light areas, wheel well flanges, etc. Our seam sealer offers a work time of approximately 8 minutes and can be painted in 15 minutes. Quick curing properties enhance automotive body shop productivity.
Price: $244.93

(Case of 6 Each)

  • $244.93
  • Case of 6 - $244.93
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      5.2 lbs
    • SKU
      7000148242
    • UPC/ISBN
      00051131083073
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000148242
  • 3M ID
    60980105807
  • UPC
    00-51131-08307-3
  • Product Formal Name
    3M™ Self-Leveling Seam Sealer, 08307, 200 mL Cartridge, 6 per case
  • Brand-old
    3M
  • Case Unit
    Case of 6
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Color
    Clear
  • Color-old
    Clear
  • Inventory Status Code
    S
  • Data Sheet
    http://multimedia.3m.com/mws/media/903667O
  • Technical Information
    https://multimedia.3m.com/mws/media/903667J/3mtm-self-leveling-seam-sealer-08307.jpg
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4YtvMxmGNv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Applications
    Roof Seams
  • Adhesive Type
    Epoxy
  • Consistency
    Liquid
  • Return Policy
    No Return
  • Box Length (in)
    11.9
  • Box Width (in)
    9.5
  • Box Height (in)
    5.3
  • Bullets
    • Bullet 1
      - Self-leveling epoxy designed for areas requiring a flowable type sealer
      - Ready for painting in 15 minutes
      - Transparent in color for a low profile appearance
      - Cured sealer matches OEM seams for a professional look
      - Formula is made for the automotive aftermarket industry
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      3214100010
    • UNSPSC Code
      25000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      LIMITED QUANTITY
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      UN2735, AMINES, LIQUID, CORROSIVE, N.O.S., (2,4,6-TRIS(DIMETHYLAMINO)METHYL) PHENOL), 8, III, LIMITED QUANTITY
    • NMFC Item
      149610
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      UN2735, AMINES, LIQUID, CORROSIVE, N.O.S., (2,4,6-TRIS(DIMETHYLAMINO)METHYL) PHENOL), 8, III
    • International Maritime Organization
      UN2735, AMINES, LIQUID, CORROSIVE, N.O.S., (2,4,6-TRIS(DIMETHYLAMINO)METHYL) PHENOL), 8, III, LIMITED QUANTITY
    • Flashpoint Transport
      >200°F/93°C
  • SKU
    7000148242
  • UPC/ISBN
    00051131083073

Self Levels Before It Cures3M™ Self-Leveling Seam Sealer uses a flexible two-part epoxy technology to reliably seal seams in properly prepared metal enclosures in auto bodies. This sealer provides a self-leveling characteristic that allows it to flow before curing and is perfect for horizontal applications requiring a smooth, puddled, application of seam sealer.3M™ Self-Leveling Seam Sealer is applied directly over primed metal and matches OEM seams with no shrinkage or cracking.Where to UseOur self-leveling seam sealer is designed for use in the auto body industry and is typically used to replace roof division channel" sealers, this sealer is not recommended for the repair of vessels designed to contain liquids or liquids under pressure. 3M™ Self-Leveling Seam Sealer may be suitable for some architectural or industrial applications (user assumes responsibility to test for suitability).

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M Roof Ditch Blending

Customers who bought this product also bought

Customers who viewed this product bought