3M™ Neoprene Contact Adhesive 5, Green, 5 Gallon Drum (Pail)
3M™ Neoprene Contact Adhesive 5 is a versatile, solvent based adhesive with a low viscosity for spraying. It offers high immediate handling strength and good heat resistance, and is commonly used for bonding most metals and plastics. It is also suitable for large surface panel or composite lamination.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000046576
-
3M ID62449785203
-
UPC00-21200-21232-1
-
Product Formal Name3M™ Neoprene Contact Adhesive 5, Green, 5 Gallon Drum (Pail)
-
Brand-old3M
-
Case UnitOrder of 1 Cases of 1
-
Unit of Measure5 Gallon Drum (Pail)
-
Product ID5
-
Estimated Lead Time2
-
Volume5 Gallon Drum (Pail)
-
ColorGreen
-
Color-oldGreen
-
Inventory Status CodeS
-
Data Sheethttp://multimedia.3m.com/mws/media/65940O
-
Technical Informationhttps://multimedia.3m.com/mws/media/65940J/neoprene-contact-adh-5-green-light-yellow.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4xtvoY_xov70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormBulk
-
IndustriesConstruction
-
ApplicationsBond Polystyrene Foam Panels
-
Application MethodSpray
-
Return PolicyNo Return
-
Box Length (in)11.8
-
Box Width (in)11.8
-
Box Height (in)13.5
- Bullets
-
Bullet 1- High performance sprayable laminating contact adhesive
- Adheres sheet metals, such as stainless steel, aluminum, cold rolled steel and many plastics to other various substrates
- High performance laminating adhesive
- Excellent moisture and heat resistance and will perform up to up to 300°F/148°C
- Available in pails and drums
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506915000
-
UNSPSC Code31200000
-
United States Department Of Transportation Ground US DOT, 49 CFRUN1133, ADHESIVES, 3, II
-
United States Department Of Transportation Vessel US DOT, 49 CFRUN1133, ADHESIVES, 3, II, MARINE POLLUTANT, (HEPTANE, HEXANE), -020C
-
NMFC Item044500
-
NMFC Class092.5
-
NMFC Sub02
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationFORBIDDEN 3M PACKAGING DOES NOT MEET REGULATORY AGENCY REQUIREMENTS
-
International Maritime OrganizationUN1133, ADHESIVES, 3, II, MARINE POLLUTANT, (HEPTANE, HEXANE), -020C
-
Flashpoint Transport-4°F/-20°C
-
-
SKU7000046576
-
UPC/ISBN00021200212321
A Versatile Rubber and Gasket AdhesiveOur 3M™ Neoprene Contact Adhesive 5 has been one of our most versatile solvent based adhesives for heavy duty surface laminations for 60-plus years. It provides excellent heat and water resistance, performing in temperatures up to 300F/1483M™ Neoprene Contact Adhesive 5 sprays easily and dries quickly while allowing time for positioning without slowing down work processes.Recommended ApplicationsComposite panel constructionGeneral contact adhesive applicationsWoodworkingApplying Your AdhesiveWhether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you've formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.