3M™ HoldFast 70 Cylinder Spray Adhesive, Clear, Large Cylinder (Net Wt 27.3 lb), 1/case
3M™ HoldFast 70 Cylinder Spray Adhesive is our extremely versatile, fast-tacking industrial grade spray adhesive with a unique wide-web spray pattern well suited for bonding a variety of construction materials. It requires a short dry time yet provides long open time to perfectly position your materials. It is an effective adhesive for waterproofing and protecting from moisture.
VOC regulations in the following states may restrict product sale and/or use:CA, CT, DC, DE, GA, IL, IN, MA, MD, ME, NC, NH, NJ, NY, OH, PA, RI, TX, UT, VA.VOC values are listed in Section 9 of the corresponding SDS.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100138479
-
3M ID62498380302
-
UPC00-48011-61690-2
-
Product Formal Name3M™ HoldFast 70 Cylinder Spray Adhesive, Clear, Large Cylinder (Net Wt 27.3 lb), 1/case
-
Brand-old3M
-
Case UnitCase of 1
-
Unit of MeasureEach
-
Product ID70
-
Estimated Lead Time2
-
VolumeCylinder - Large
-
ColorClear
-
Inventory Status CodeS
-
Data Sheethttp://multimedia.3m.com/mws/media/933237O
-
Technical Informationhttps://multimedia.3m.com/mws/media/1370154J/cold-weather-effects-on-cylinder-adhesives-technical-bulletin.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMx2UN82Glv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormCylinder
-
IndustriesConstruction
-
ApplicationsBond Polystyrene Foam Panels
-
Application MethodSpray
-
Adhesive TypeSynthetic Elastomer
-
Return PolicyNo Return
-
Box Length (in)12.1
-
Box Width (in)12.1
-
Box Height (in)17.9
- Bullets
-
Bullet 1- Versatile adhesive Ideal for construction sites
- Creates Quick bonds for Temporary and PERMANENT needs
- very fast-tacking adhesive bonds almost immediately and has a long bonding range
- Portable container Provides a Spray pattern with low soak-in and No overspray
- bonds polystyrene without damaging the material or degrading the surface
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506990000
-
UNSPSC Code31200000
-
United States Department Of Transportation Ground US DOT, 49 CFRUN3501, CHEMICAL UNDER PRESSURE, FLAMMABLE, N.O.S., (DIMETHYL ETHER, PENTANE), 2.1
-
United States Department Of Transportation Vessel US DOT, 49 CFRUN3501, CHEMICAL UNDER PRESSURE, FLAMMABLE, N.O.S., (DIMETHYL ETHER, PENTANE), 2.1
-
NMFC Item085890
-
NMFC Class125.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationUN3501, CHEMICAL UNDER PRESSURE, FLAMMABLE, N.O.S., (DIMETHYL ETHER, PENTANE), 2.1
-
International Maritime OrganizationUN3501, CHEMICAL UNDER PRESSURE, FLAMMABLE, N.O.S., (DIMETHYL ETHER, PENTANE), 2.1
-
Flashpoint TransportNo Flash Point
-
-
SKU7100138479
-
UPC/ISBN00048011616902
Ideal for Bonding Construction Materials3M™ HoldFast 70 Cylinder Spray Adhesive creates quick permanent bonds on many substrates, including polystyrene, drainboard, FRP panels, insulation, foams and fabrics and is useful for waterproofing and moisture control. Its high solids content gives you high coverage by helping by minimizing its soaking into the substrate and maximize its holding power.Typically used in construction, specialty vehicle, RV, manufactured housing, and HVAC, this adhesive is packaged in pre-pressurized, portable cylinder for an easy to use, maintenance-free delivery system. Additional spray accessories, sold separately, are required.Recommended ApplicationsIdeal for bonding a variety of substrates, including polystyreneOne- and two-surface bondingMembrane bonding to concreteInsulation attachmentHVAC applicationsGeotextilesDrainboardHouse wrap protective barriersOSB plywoodPortable, Sprayable Adhesives3M Cylinders are self-contained and pressurized. Available in a variety of sizes, they are portable and require minimal equipment investment and maintenance. Each cylinder is self-contained, pressurized, and ready for immediate use. Their optimized spray patterns cut waste and maximize adhesive coverage. 3M offers a complete line of innovative sprayable adhesives that are essential elements for a wide range of industrial applications, proven to be ideal for construction. With 3M aerosol adhesives, only a touch puts a job-matched formulation to work on paper, plastic, cardboard, foam, metal, and more. Most 3M aerosol adhesives also have a controlled spray pattern to help minimize overspray, clean-up, and unused adhesive.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.