3M™ Foam Fast 74 Cylinder Spray Adhesive, Orange, Large Cylinder (Net Wt 28.8 lb), 1/case
3M™ Foam Fast 74 Spray Adhesive is a fast-drying spray adhesive that bonds foam and fabric to a wide range of substrates. Its permanent bond provides fast results to keep projects moving ahead. The non-yellowing formula dispenses easily in a lace-spray pattern and applies directly onto surfaces and materials where needed.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000046582
-
3M ID62491280301
-
UPC00-48011-62852-8
-
Product Formal Name3M™ Foam Fast 74 Cylinder Spray Adhesive, Orange, Large Cylinder (Net Wt 28.8 lb), 1/case
-
Brand-old3M
-
Case UnitCase of 1
-
Unit of MeasureEach
-
Product ID74
-
Estimated Lead Time2
-
VolumeCylinder - Large
-
ColorOrange
-
Color-oldOrange
-
Inventory Status CodeS
-
Data Sheethttp://multimedia.3m.com/mws/media/796068O
-
Technical Informationhttps://multimedia.3m.com/mws/media/796068O/foam-fast-74-spray-adhesive.pdf&fn=74_R1.pdf
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM82S48m9nv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormCylinder
-
IndustriesAutomotive
-
ApplicationsLarge Surface Lamination Assembly
-
Application MethodSpray
-
Return PolicyNo Return
-
Box Length (in)12.3
-
Box Width (in)12.3
-
Box Height (in)18.1
- Bullets
-
Bullet 1Designed specifically for foams and fabrics
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506915000
-
UNSPSC Code31200000
-
United States Department Of Transportation Ground US DOT, 49 CFRUN3501, CHEMICAL UNDER PRESSURE, FLAMMABLE, N.O.S., (DIMETHYL ETHER, PROPANE), 2.1
-
United States Department Of Transportation Vessel US DOT, 49 CFRUN3501, CHEMICAL UNDER PRESSURE, FLAMMABLE, N.O.S., (DIMETHYL ETHER, PROPANE), 2.1
-
NMFC Item085890
-
NMFC Class125.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationUN3501, CHEMICAL UNDER PRESSURE, FLAMMABLE, N.O.S., (DIMETHYL ETHER, PROPANE), 2.1
-
International Maritime OrganizationUN3501, CHEMICAL UNDER PRESSURE, FLAMMABLE, N.O.S., (DIMETHYL ETHER, PROPANE), 2.1
-
Flashpoint TransportNo Flash Point
-
-
SKU7000046582
-
UPC/ISBN00021200491580
Fast-Acting, Long Lasting 3M™ Foam Fast 74 Spray Adhesive is a long-time member of 3M's portfolio of go-to, everyday-use adhesives considered by many to be necessary at the factory. For many, "getting the job done" is just a spray away. Our 3M™ Foam Fast 74 Spray Adhesive has an aggressive tack that offers a high initial grab with foam-tearing strength, yet allows sufficient open time to position materials properly. High-solids content supports its low soak-in property, giving you time to position parts for best fit. This attribute also provides higher coverage than competing spray adhesives and helps create soft, non-dimpling glue lines. The lace-spray pattern of its non-yellowing adhesive, combined with its fast tack, strong bond and clean appearance, make it ideal for projects of all kinds. 3M™ Foam Fast 74 Spray Adhesive is also offered in low-VOC aerosols, as well as non-flammable cylinders and bulk. Recommended Applications General upholstery Foam lamination Attaching foam and fabric to wood and other substrates Ideal for crafts and hobbies Installing acoustic panels Fit for Foam and Fabric 3M™ Foam Fast 74 Spray Adhesive is capable of bonding foam and fabric onto a wide array of materials, including paper, cardboard, plastic, metal, wood and much more. This spray adhesive has been proven to work well for projects both large and small. Additionally, our 3M™ Foam Fast 74 CA Spray Adhesive- Low VOC Unlike any Glue When 3M™ Foam Fast 74 Spray Adhesive was designed, we aimed to overcome the obstacles faced when applying the existing glues on the market. By inventing what can be considered a unique "spray glue," 3M was capable of providing a self-contained adhesive solution that saves both time and money.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.