3M™ Scotch-Weld™ Urethane Adhesive DP620NS, Black, 48.5 mL Duo-Pak, 12/case
3M™ Scotch-Weld™ Urethane Adhesive DP620NS is a flexible, two-part polyurethane based structural adhesive that performs well in numerous applications where some flexibility is needed. It effectively bonds to many substrates such as composites, metals, wood, and many plastics and rubbers, ceramics and glass (may require primer for durability).
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100148737
-
3M ID62264550310
-
UPC06-38060-08960-6
-
Product Formal Name3M™ Scotch-Weld™ Urethane Adhesive DP620NS, Black, 48.5 mL Duo-Pak, 12/case
-
BrandScotch-Weld
-
Case UnitCase of 12
-
Unit of MeasureEach
-
Product IDDP620NS
-
Estimated Lead Time2
-
Volume48.5 mL
-
ColorBlack
-
Inventory Status CodeS
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4YtSM8tB4v70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)6.4
-
Box Width (in)4.9
-
Box Height (in)6.4
- Bullets
-
Bullet 1- Ideal choice for bonding dissimilar substrates
- Non-sagging after dispensing so adhesive stays where placed
- low temperature flexibility and low shrinkage
- long open time Provides ample opportunity to position and adjust Work
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506105000
-
UNSPSC Code31200000
-
United States Department Of Transportation Ground US DOT, 49 CFRLIMITED QUANTITY
-
United States Department Of Transportation Vessel US DOT, 49 CFRUN3267, CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S., (ISOPHORONE DIAMINE, POTASSIUM OXIDE), 8, III, LIMITED QUANTITY
-
NMFC Item004620
-
NMFC Class060.0
-
NMFC Sub02
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationUN3267, CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S., (ISOPHORONE DIAMINE, POTASSIUM OXIDE), 8, III
-
International Maritime OrganizationUN3267, CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S., (ISOPHORONE DIAMINE, POTASSIUM OXIDE), 8, III, LIMITED QUANTITY
-
Flashpoint TransportNo Flash Point
-
-
SKU7100148737
-
UPC/ISBN00638060089606
When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing. Flexible Adhesive Delivers Tough Bonds As compared to one part sealants, 3M™ Scotch-Weld™ Urethane Adhesive DP620NS is fast-curing, establishes tough bonds and offers low-temperature flexibility. It dispenses as a non-sag paste for accurate and precise handling during application. This adhesive can be used for bonding dissimilar substrates, such as concrete, ceramic, wood, plastic, rubber and metal. With a 1:1 mix ratio, this urethane adhesive has a 20 minute work life, reaches handing strength in 4 hours and full cure in 48 hours.Recommended ApplicationsBonding composite panels to frames for transportation applicationsBonding wood, metal or composite door frames to wood or other surfacesBonding wood paneling to wood or plasterSealing fabric water hosesEncapsulating for tamper proofingFlexible plastic or composite bondingUnderstanding Urethane AdhesivesTwo part urethane adhesives cure chemically, rather than relying on moisture from the air. Because of this, they can cure quickly with no depth of cure issues in contrast to one-part urethane adhesive sealants. Urethane adhesives will bond most common materials such as wood, metals, rubbers, leather, tile and glass, many plastics, concrete and more. The versatility of urethane adhesives is exhibited in the different formulations that have varying cured properties such as different levels of stiffness or flexibility, open time and cure speed, and hardness. They can cure to a relatively rigid or highly flexible state to meet a wide range of requirements. In either finished state, urethane adhesives will maintain bond strength integrity through variable environmental factors such as temperature, moisture and chemical exposure.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.