3M™ Scotch-Weld™ Metal Bonder Acrylic Adhesive DP8407NS, Gray, 490 mL Duo-Pak, 6/case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100179480
-
3M ID62285336319
-
UPC06-38060-14643-9
-
Product Formal Name3M™ Scotch-Weld™ Metal Bonder Acrylic Adhesive DP8407NS, Gray, 490 mL Duo-Pak, 6/case
-
BrandScotch-Weld
-
Case UnitCase of 6
-
Unit of MeasureEach
-
Product IDDP8407NS
-
Estimated Lead Time2
-
Volume490 mL
-
ColorGray
-
Inventory Status CodeS
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)8.4
-
Box Width (in)7.9
-
Box Height (in)9.7
- Bullets
-
Bullet 1- Bonds to bare, oily metals
- Withstands powder coat and paint bake cycles up to 400°F (204°C) for at least one hour
- Offers high shear, peel and impact strength for a tough and durable bond
- Provides excellent bond strength; maintains high shear strength down to -40°F (-40°C)
- 6 minute work life and fast strength build-up at room temperature
- Ideal for industrial applications with minimal surface preparation, such as slightly oily metal bonding
- Moderate non-sag formula won't slump or spread excessively
- Long shelf life, no refrigeration
-
- Transportation
-
United States Department Of Transportation Ground US DOT, 49 CFRLIMITED QUANTITY
-
United States Department Of Transportation Vessel US DOT, 49 CFRUN1133, ADHESIVES, 3, II, LIMITED QUANTITY, +010C
-
NMFC Item004620
-
NMFC Class000.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationUN1133, ADHESIVES, 3, II
-
International Maritime OrganizationUN1133, ADHESIVES, 3, II, LIMITED QUANTITY, +010C
-
Flashpoint Transport>50F/10C
-
-
SKU7100179480
-
UPC/ISBN00638060146439
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.