3M™ Scotch-Weld™ Epoxy Potting Compound DP270, Clear, 48.5 mL Duo-Pak, 12/case
3M™ Scotch-Weld™ Epoxy Potting Compound DP270 is low viscosity for easy dispensing and potting. It is non-corrosive to copper, minimal exotherm and very low shrinkage – making it well-suited for potting and bonding electronic and electrical components.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100148730
-
3M ID62326214368
-
UPC06-38060-08973-6
-
Product Formal Name3M™ Scotch-Weld™ Epoxy Potting Compound DP270, Clear, 48.5 mL Duo-Pak, 12/case
-
BrandScotch-Weld
-
Case UnitCase of 12
-
Unit of MeasureEach
-
Product IDDP270
-
Estimated Lead Time2
-
Volume48.5 mL
-
ColorClear
-
Inventory Status CodeS
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4x_vm8_9mv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)6.1
-
Box Width (in)4.6
-
Box Height (in)5.3
- Bullets
-
Bullet 1- Features a 70 minute work life
- Rigid potting compound is non-corrosive to copper
- Minimal exotherm and very low shrinkage
- Flammability testing per UL94 HB
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506105000
-
UNSPSC Code31200000
-
United States Department Of Transportation Ground US DOT, 49 CFRLIMITED QUANTITY
-
United States Department Of Transportation Vessel US DOT, 49 CFRUN2810, TOXIC LIQUID, ORGANIC, N.O.S., (4,4-METHYLENEBIS(2-METHYLCYCLOHEXYLAMINE)), 6.1, III, LIMITED QUANTITY
-
NMFC Item004620
-
NMFC Class060.0
-
NMFC Sub02
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationUN2810, TOXIC LIQUID, ORGANIC, N.O.S., (4,4-METHYLENEBIS(2-METHYLCYCLOHEXYLAMINE)), 6.1, III
-
International Maritime OrganizationUN2810, TOXIC LIQUID, ORGANIC, N.O.S., (4,4-METHYLENEBIS(2-METHYLCYCLOHEXYLAMINE)), 6.1, III, LIMITED QUANTITY
-
Flashpoint Transport>240°F/115°C
-
-
SKU7100148730
-
UPC/ISBN00638060089736
When using a Duo-Pak (DP) size adhesive, rely on3M dispensing equipment for convenient and accurate metering, mixing and dispensing. Low viscosity for easy dispensing and pottingEpoxy Compound Features 70 Minute Work Life Our 3M™ Scotch-Weld™ Epoxy Potting Compound DP270 is a rigid, two-part epoxy adhesive with a 1:1 mix ratio and 70 minute work life. It provides initial strength in about 3 hours with approximately 2,500 PSI at 72F (22C). Additionally, our 3M™ Scotch-Weld™ Epoxy Potting Compound DP270 is low viscosity for easy dispensing and potting; and is non-corrosive to copper. It offers good resistance to medical sterilization and is available in black opaque and transparent amber. Recommended Applications Potting and bonding electrical components Understanding Epoxy Adhesives Epoxy adhesives are part of the class of adhesives called "structural adhesives," which include polyurethane, acrylic, cyanoacrylate and others. Epoxies are formulated as liquid reactive polymers that undergo a chemical reaction when mixed and then cure to form a solid plastic material. Once the two parts are mixed in their specified ratio, they begin the curing process and offer a limited working time where the adhesive can be applied and the two surfaces positioned as needed. This work life lasts anywhere from a few minutes to several hours. These structural adhesives provide high shear and peel strengths, depending on the formula, and better heat and chemical resistance than other common adhesives. In general, epoxy adhesives have the highest overall strength and offer the best performance and most resistance to high temperatures, solvents and outdoor weathering. Epoxy adhesive (often referred to as epoxy glue) is widely used in building and home construction; aircraft and automobile manufacturing; bicycle, boat, golf clubs, ski and snowboard assembly as well as a host of home use and other applications. It is used virtually anywhere high-strength bonds are needed along with resistance to environmental conditions. These adhesives are popular for their ease of use, mechanical strength and chemical resistance. Formulations can be created to make epoxy for plastic flexible or epoxy for metal rigid, epoxy resin transparent or opaque, quick setting or slow setting. The versatility with which these adhesives can be formulated helps meet almost any requirement for bonding wood, metal, glass, stone and various plastics.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.
