3M™ Scotch-Weld™ Epoxy Adhesive 2214 Hi-Temp, Gray, 6 fl oz Cartridge, 6/case
3M™ Scotch-Weld™ Epoxy Adhesive 2214 Hi-Temp is designed to provide high strength, high temperature resistance and smooth bond lines. This aluminum-filled product is designed for use where higher strengths are required between 180°F to 350°F (82°C to 177°C), especially on steel.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time10
-
Manufacturer3M
-
SAP7000121274
-
3M ID62340229301
-
UPC00-21200-20806-5
-
Product Formal Name3M™ Scotch-Weld™ Epoxy Adhesive 2214 Hi-Temp, Gray, 6 fl oz Cartridge, 6/case
-
Brand-oldScotch-Weld
-
BrandScotch-Weld
-
Case UnitCase of 6
-
Unit of MeasureEach
-
Product ID2214
-
Estimated Lead Time10
-
Volume6 oz
-
ColorGray
-
Color-oldGray
-
Inventory Status CodeN
-
PositionBest
-
Data Sheethttp://multimedia.3m.com/mws/media/66743O
-
Technical Informationhttps://multimedia.3m.com/mws/media/79082J/joint-design-for-structural-adhesives-technical-bulletin.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4xtvO8mZPv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormCartridge
-
IndustriesConstruction
-
Adhesive TypeEpoxy
-
Return PolicyNo Return
-
Box Length (in)8.8
-
Box Width (in)6.2
-
Box Height (in)4.3
- Bullets
-
Bullet 1- One part, 100% solids, heat curing adhesive
- Pliable paste consistency goes where needed with no sagging
- Higher temperature strength than 3M™ Scotch-Weld™ Epoxy Adhesive 2214 Regular
- Maintains excellent structural strength at temperatures up to 300ºF (149ºC)
- Flammability testing per UL94 HB
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506915000
-
UNSPSC Code31200000
-
United States Department Of Transportation Ground US DOT, 49 CFRUN3238, SELF-REACTIVE SOLID TYPE E, TEMPERATURE CONTROLLED, (EPOXY RESIN), 4.1, CA1996030005 ATTACHED, CONTROL TEMPERATURE = 35C(95F), EMERGENCY TEMPERATURE = 40C(104F)
-
United States Department Of Transportation Vessel US DOT, 49 CFRFORBIDDEN 3M US DIVISION POLICY
-
NMFC Item046047
-
NMFC Class200.0
-
NMFC Sub01
-
Transport Protective ServiceREFRIGERATE-SURFACE(DRYICE-AIR)
-
International Air Transport AssociationFORBIDDEN NOT ALLOWED BY THE REGULATORY AGENCY
-
International Maritime OrganizationFORBIDDEN 3M US DIVISION POLICY
-
Flashpoint TransportNo Flash Point
-
-
SKU7000121274
-
UPC/ISBN00021200208065
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.