3M™ Scotch-Weld™ Epoxy Adhesive 1469, Cream, 5 Gallon Drum (Pail)
3M™ Scotch-Weld™ Epoxy Adhesive 1469 is a one-part, thermosetting liquid adhesive that provides exceptionally high strength at temperatures from -70°F to 300°F (-57°C to 149°C). This white to cream colored adhesive can be applied by knife coating, trowel, roller coating, pump and high pressure injection methods.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time33
-
Manufacturer3M
-
SAP7100056050
-
3M ID62146985254
-
UPC00-21200-19950-9
-
Product Formal Name3M™ Scotch-Weld™ Epoxy Adhesive 1469, Cream, 5 Gallon Drum (Pail)
-
BrandScotch-Weld
-
Case UnitCase of 1
-
Unit of Measure5 Gallon Drum (Pail)
-
Product ID1469
-
Estimated Lead Time33
-
Volume5 Gallon Drum (Pail)
-
ColorCream
-
Inventory Status CodeN
-
Technical Informationhttps://multimedia.3m.com/mws/media/79082J/joint-design-for-structural-adhesives-technical-bulletin.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4xtx4x2xOv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)11.9
-
Box Width (in)11.9
-
Box Height (in)13.3
- Bullets
-
Bullet 1- Excellent retention of strength after aging in typical environments
- Exceptionally high strength properties at service temperatures from -70°F to 300°F (-57°C to 149°C)
- Easy application by knife coating, trowel, roller coating, pump and high pressure injection methods
- Wide process window for curing: 300°F-450°F (150°C-232°C)
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506911000;3506915000
-
UNSPSC Code31201607
-
United States Department Of Transportation Ground US DOT, 49 CFRUN3531, POLYMERIZING SUBSTANCE, SOLID, STABILIZED, N.O.S., (EPOXY RESIN), 4.1, III
-
United States Department Of Transportation Vessel US DOT, 49 CFRFORBIDDEN 3M US DIVISION POLICY
-
NMFC Item044515
-
NMFC Class092.5
-
NMFC Sub07
-
Transport Protective ServiceREFRIGERATE-SURFACE(DRYICE-AIR)
-
International Air Transport AssociationFORBIDDEN PACKAGE SIZE EXCEEDS IATA QUANTITY LIMITATIONS
-
International Maritime OrganizationFORBIDDEN 3M US DIVISION POLICY
-
Flashpoint TransportNo Flash Point
-
-
SKU7100056050
-
UPC/ISBN00021200199509
A one-part, 100% solids, thermosetting liquid adhesiveExcellent Retention of Strength after Aging in Typical Environments Our 3M™ Scotch-Weld™ Epoxy Adhesive 1469 eliminates the need for metering or mixing and weighing two part systems. This product offers exceptionally high performance at service temperatures ranging from -70F to 300F (-57C to 149C). Can reach more than 2,000 PSI at 300F. Our adhesive provides excellent strength retention after aging in typical environments. Suggested cure profile: 2 hours at 350F (177C). Recommended Applications Metal to metal bonding Understanding Epoxy Adhesives Epoxy adhesives are part of the class of adhesives called "structural adhesives," which include polyurethane, acrylic, cyanoacrylate and others. Epoxies are formulated as liquid reactive polymers that undergo a chemical reaction when mixed and then cure to form a solid plastic material. Once the two parts are mixed in their specified ratio, they begin the curing process and offer a limited working time where the adhesive can be applied and the two surfaces positioned as needed. This work life lasts anywhere from a few minutes to several hours. These structural adhesives provide high shear and peel strengths, depending on the formula, and better heat and chemical resistance than other common adhesives. In general, epoxy adhesives have the highest overall strength and offer the best performance and most resistance to high temperatures, solvents and outdoor weathering. Epoxy adhesive (often referred to as epoxy glue) is widely used in building and home construction; aircraft and automobile manufacturing; bicycle, boat, golf clubs, ski and snowboard assembly as well as a host of home use and other applications. It is used virtually anywhere high-strength bonds are needed along with resistance to environmental conditions. These adhesives are popular for their ease of use, mechanical strength and chemical resistance. Formulations can be created to make epoxy for plastic flexible or epoxy for metal rigid, epoxy resin transparent or opaque, quick setting or slow setting. The versatility with which these adhesives can be formulated helps meet almost any requirement for bonding wood, metal, glass, stone and various plastics.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.