3M™ Factory-Match Seam Sealer, 08323, 200 mL Cartridge, 6 per case

We designed 3M™ Factory-Match Seam Sealer using two part urethane technology to provide a tough flexible material for the sealing of joints on primed or painted substrates such as steel or aluminum enclosures. This material provides excellent flexibility and elongation properties along with a medium/high viscosity and produces a slight flow-out after application.
Price: $245.12

(Case of 6 Each)

  • $245.12
  • Case of 6 - $245.12
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      5.3 lbs
    • SKU
      7000148202
    • UPC/ISBN
      00051135083239
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000148202
  • 3M ID
    60455030563
  • UPC
    00-51135-08323-9
  • Product Formal Name
    3M™ Factory-Match Seam Sealer, 08323, 200 mL Cartridge, 6 per case
  • Case Unit
    Case of 6
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Technical Information
    https://multimedia.3m.com/mws/media/889066J/tds-08323-3m-factory-match-seam-sealer-rev-3.jpg
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMx2vNx21ov70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    12
  • Box Width (in)
    9.6
  • Box Height (in)
    5.4
  • Bullets
    • Bullet 1
      - Metered static mixing with dual syringe cartridge eliminates the difficulty and mess of manual mixing
      - High performance two-part urethane seals vertical or horizontal seams to match OEM seals
      - Flows slightly and softens on the edges without tooling for a rounded appearance
      - Quick cure time and non-sag property aids during vertical applications
      - Black
      - To create a ribbon bead, use a 3M OEM Sealer Tip - 3/8 inch Flat PN 08204
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      3506915000
    • UNSPSC Code
      25000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
    • NMFC Item
      149610
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT RESTRICTED, AS PER SPECIAL PROVISION A197, ENVIRONMENTALLY HAZARDOUS SUBSTANCE EXCEPTION
    • International Maritime Organization
      NOT RESTRICTED, AS PER IMDG CODE 2.10.2.7, MARINE POLLUTANT EXCEPTION
    • Flashpoint Transport
      >290°F/143°C
  • SKU
    7000148202
  • UPC/ISBN
    00051135083239

Eliminate DowntimeSingle component sealers require significant dry time before components can be handled or further processed in your shop. Our high-performance 3M™ Factory-Match Seam Sealer operates with a two-part cartridge and nozzle that self-mixes with a perfect formulation every time allowing for fast easy application and quicker cycle time than with one part sealers. 3M™ Factory-Match Seam Sealer may be top coated with paints in 45 minutes under normal conditions.Match OEM AppearancesThis professional-quality black seam sealer can be used to seal vertical or horizontal seams on automotive surfaces primed with a 2K urethane, 2K epoxy primer, or clean, sanded paint. Its slight flow-out softens on the edges, without tooling, giving a rounded appearance. This flexible rounded seam seal is suitable for duplicating factory door skin seams and matching OEM beads.Durable, Fast-Cure Formula Creates a High Quality SealOur flexible formula works within a wide range of temperatures with no shrinking or cracking to achieve strong, durable construction. It offers a fast setup time of 10 minutes, decreasing downtime and allowing technicians to continue repair procedures quicker for increased productivity. Moreover, the fast-cure formula means there is a limited time of uncured product on the car and the risk of damaging the seam by disturbing uncured seam sealer is greatly reduced. This enables technicians to quickly achieve a long-lasting, high quality seam seal.Using the Seam Sealer Effectively3M™ Factory-Match Seam Sealer can be used with the following 3M™ Applicators: PN 08117 (manual), PN 08571 (manual), and PN 09930 (pneumatic). Also use 3M™ Mix Nozzle: PN 08193 (6/bag), PN 8194 (50/box) and 3M™ OEM Sealer Tip PNs 08201 - 08205.The following times have been determined with ambient air temperature and substrate temperature at 70F (21C) and are considered typical values:WORK TIME: 10 minutesMIX NOZZLE DWELL TIME: 6 minutesCURE TIME: 4 hoursPAINT TIME: 45 minutesTENSILE STRENGTH: 2517PSI ELONGATION: 390%3M best practice is that all sealers, unless designated specifically for use on bare metal, be applied to properly prepared automotive paint or primer. Apply only to surfaces primed with a 2K urethane, 2K epoxy primer, or clean, sanded paint. Acid etch primers should never be in direct contact with seam sealer. Prior to application, scuff primed surface with a Scotch-Brite™ General Purpose Hand Pad, PN 07448 (Ultrafine).3M Science Meets the Needs of Automotive Professionals3M used the technical properties of two-part urethane to create a sealer that combines toughness with flexibility. 3M™ Factory - Match Seam Sealer is ideal for lasting seam sealing protection on many different surfaces, and allows technicians to expertly recreate OEM seam sealer appearances. This formula represents another way 3M applies science to improve working conditions and productivity in the automotive industry.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Customers who viewed this product bought