3M™ Nitrile High Performance Plastic Adhesive 1099, Tan, 1 Quart Can, 12/case
3M™ Nitrile High Performance Plastic Adhesive 1099 dries quickly with an open time of approximately 40 minutes. Its assembled bonds are proven to be strong while resisting weathering as well as damage from water, oil and fuel. Additionally, it bonds well to plastics and vinyl, providing long-term adhesion as well as good resistance to plasticizer migration.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000000797
-
3M ID62109965301
-
UPC00-21200-19811-3
-
Product Formal Name3M™ Nitrile High Performance Plastic Adhesive 1099, Tan, 1 Quart Can, 12/case
-
Brand-old3M
-
Case UnitCase of 12
-
Unit of MeasureCanister
-
Product ID1099
-
Estimated Lead Time2
-
VolumeQuart
-
ColorTan
-
Color-oldLight Tan
-
Inventory Status CodeS
-
Data Sheethttp://multimedia.3m.com/mws/media/66737O
-
Technical Informationhttps://multimedia.3m.com/mws/media/66737J/nitrile-hi-performance-plastic-adh-1099-1099-l.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4xtvN8tv4v70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormBulk
-
IndustriesGeneral Industrial
-
Application MethodBrush
-
Return PolicyNo Return
-
Box Length (in)14.7
-
Box Width (in)9.9
-
Box Height (in)11.9
- Bullets
-
Bullet 1- High performance adhesive forms strong bonds on most vinyls and plastics
- resists weathering, water, Oil, plasticizer migration and fuels
- Provides strong, Quick drying flexible bonds
- Optional heat cure increases bond strength
- Sprayable with industrial grade Spray equipment
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506105000
-
UNSPSC Code31200000
-
United States Department Of Transportation Ground US DOT, 49 CFRLIMITED QUANTITY
-
United States Department Of Transportation Vessel US DOT, 49 CFRUN1133, ADHESIVES, 3, II, LIMITED QUANTITY, -020C
-
NMFC Item004620
-
NMFC Class060.0
-
NMFC Sub02
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationUN1133, ADHESIVES, 3, II
-
International Maritime OrganizationUN1133, ADHESIVES, 3, II, LIMITED QUANTITY, -020C
-
Flashpoint Transport-4°F/-20°C
-
-
SKU7000000797
-
UPC/ISBN00021200198113
Ideal for Vinyl & PlasticOur 3M™ Nitrile High Performance Plastic Adhesive 1099 bonds to a variety of substrates - primarily leather and most vinyl sheeting as used in awnings, upholstery and faux leather - as well as plastics, for a strong, enduring bond. However, it may stain thin or light-colored vinyls.Recommended Applications Bonding most vinyls and plastics (not recommended for polyolefin plastic bonding)Aftermarket automotive repair, including panel installation and upholsteryBanners and awningsGeneral industrialMROSpeed Up the Bonding ProcessWith 3M™ Nitrile High Performance Plastic Adhesive 1099 you can quickly meet the requirements of your bonding application. This fast drying adhesive forms a durable bond at room temperature, but also has optional heat-initiated chemical reaction to achieve even higher bond properties. Additionally, this adhesive is sprayable with industrial grade spray equipment, bringing convenience and consistency to large scale applications.Applying Your AdhesiveWhether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you've formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.