3M™ Platinum™ Body Filler, 01231, 3 gal, 1 per case

3M™ Platinum™ Filler is a professional lightweight body filler with outstanding adhesion to properly prepared steel, galvanized steel, aluminum, E coat, sheet molded compound (SMC) and fiberglass reinforced polyester (FRP). It is formulated with tack-free, stain free resin and offers long lasting results. Premium filler is compatible with most base coat/clear coat and waterborne paint systems.
Price: $219.95

(Case of 1 Drum)

  • $219.95
  • Case of 1 - $219.95
Qty:  
Available For Backorder
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      22.8 lbs
    • SKU
      7000125037
    • UPC/ISBN
      00051593012314
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000125037
  • 3M ID
    70008001052
  • UPC
    00-51593-01231-4
  • Product Formal Name
    3M™ Platinum™ Body Filler, 01231, 3 gal, 1 per case
  • Brand
    Platinum
  • Case Unit
    Case of 1
  • Unit of Measure
    Drum
  • Part Number
    1231
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Data Sheet
    https://multimedia.3m.com/mws/media/788460O/3mtm-body-fillers-glazes-accessories.pdf&fn=60-4402-7762-6.pdf
  • Technical Information
    https://multimedia.3m.com/mws/media/762431J/3m-platinum-filler-01121-01171-01231-01271-31311-tds.jpg
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM8te4xtZMv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    11.8
  • Box Width (in)
    11.8
  • Box Height (in)
    8.6
  • Bullets
    • Bullet 1
      - Special formulation delivers superior adhesion to galvanized steel and other substrates
      - Super smooth, creamy consistency provides easy mixing and spreading
      - Fast dry time offers sanding in 20 minutes and paint or primer in 45 minutes
      - Vacuum processing makes the filler virtually pin-hole free
      - Tack-free/stain-free resin offers reliable results with most primers, coatings and waterborne paints
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      3214100090
    • UNSPSC Code
      31201605
    • United States Department Of Transportation Ground US DOT, 49 CFR
      UN1866, RESIN SOLUTION, 3, III
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      UN1866, RESIN SOLUTION, 3, III, MARINE POLLUTANT, (ZINC PHOSPHATE), +031C
    • NMFC Item
      044500
    • NMFC Class
      085.0
    • NMFC Sub
      03
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      UN1866, RESIN SOLUTION, 3, III
    • International Maritime Organization
      UN1866, RESIN SOLUTION, 3, III, MARINE POLLUTANT, (ZINC PHOSPHATE), +031C
    • Flashpoint Transport
      88°F/31°C
  • SKU
    7000125037
  • UPC/ISBN
    00051593012314

Ease of Use, Excellent Results3M™ Platinum™ Filler is a premium choice for filling small dents, dings, gouges and other cosmetic imperfections. Auto body craftsmen will appreciate its super creamy, smooth texture that mixes and spreads with ease. Moreover, the formula is vacuum processed to minimize pinholes for the smoothest possible results. Manufactured with the highest quality ingredients, 3M™ Platinum™ Filler delivers superior results when filling on many different surfaces, including many industrial and architectural surfaces needing minor repairs.Tight Grip on Metal Specially formulated with adhesion promoters for maximum adhesion, 3M™ Platinum™ Filler produces an unyielding grip to the surface, even on galvanized steel.Adheres to Primer or Paint for Use under Basecoat and ClearcoatPlatinum filler is stain free/tack-free and is perfect for use under basecoat and clearcoat systems. This resin rich body filler will wet out" sand scratches completely and provide superior mechanical adhesion, allowing technicians to apply it to cured sanded 2K primers with confidence. This eliminates the need to sand down to the bare metal, preventing the risk of corrosion and re work.Applying the Filler3M™ Platinum™ Filler must be mixed with a hardener before use (hardeners sold separately), in the amount of 2% hardener by weight. Following proper surface preparation, apply a thin layer using firm pressure to ensure maximum adhesion, then apply additional layers to build up surface. Maximum filler thickness should not exceed 1/4˝. It is ready to sand in only 20 minutes, and ready for paint or primer in 45 minutes. We recommend 3M™ Ultimate 2K Urethane Primer or another quality primer. Follow paint manufacturer's instructions for finishing.3M Science Meets the Needs of Automotive Professionals3M™ Platinum™ Filler is ideal for lasting repairs on many different surfaces, including bare metal and allows auto body professionals to expertly recreate OEM appearances. Its superior adhesion, ease of use, quick cure time, and versatility all combine to create a premium body filler. This product is one of the ways 3M supplies scientific expertise to boost performance in the automotive industry.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Customers who bought this product also bought

Customers who viewed this product bought