3M™ Scotch-Weld™ Epoxy Adhesive/Coating 2290, Amber, 55 Gallon Drum (54 Gallon Net)
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time33
-
Manufacturer3M
-
SAP7100144896
-
3M ID62384795308
-
UPC00-21200-76228-4
-
Product Formal Name3M™ Scotch-Weld™ Epoxy Adhesive/Coating 2290, Amber, 55 Gallon Drum (54 Gallon Net)
-
BrandScotch-Weld
-
Case UnitCase of 54
-
Unit of Measure54 Gallon Drum (Pail)
-
Product ID2290
-
Estimated Lead Time33
-
Volume55 Gallon Drum
-
ColorAmber
-
Inventory Status CodeN
-
Technical Informationhttps://multimedia.3m.com/mws/media/79082J/joint-design-for-structural-adhesives-technical-bulletin.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4xtGO8mU5v70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)23.5
-
Box Width (in)23.5
-
Box Height (in)34.8
- Bullets
-
Bullet 1- Offers exceptionally high shear and peel strength
- Solvent based low viscosity coating formulation
- Dries to a tack-free film which allows bonds to be made up to 3 months later for B-staging and multi-stage processes
- Excellent wetting during cure requires only coating a single surface
- Heat press during cure recommended for lamination use
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506911000;3506915000
-
UNSPSC Code31200000
-
United States Department Of Transportation Ground US DOT, 49 CFRUN1133, ADHESIVES, 3, II
-
United States Department Of Transportation Vessel US DOT, 49 CFRUN1133, ADHESIVES, 3, II, -014C
-
NMFC Item044500
-
NMFC Class092.5
-
NMFC Sub02
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationFORBIDDEN PACKAGE SIZE EXCEEDS IATA QUANTITY LIMITATIONS
-
International Maritime OrganizationUN1133, ADHESIVES, 3, II, -014C
-
Flashpoint Transport6°F/-14°C
-
-
SKU7100144896
-
UPC/ISBN00021200762284
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.